×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM Scion xB Drive Belt
Serpentine Belt- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Drive Belts found
Scion xB Power Steering Belt
Part Number: 90916-02711$10.74 MSRP: $14.96You Save: $4.22 (29%)Ships in 1-2 Business Days
Scion xB Serpentine Belt
Part Number: 90916-02705$21.74 MSRP: $30.25You Save: $8.51 (29%)Ships in 1-3 Business Days
Scion xB Serpentine Belt
Part Number: 90916-A2005$37.39 MSRP: $52.04You Save: $14.65 (29%)Ships in 1-3 Business Days
Scion xB Serpentine Belt
Part Number: 90916-02652$38.83 MSRP: $54.04You Save: $15.21 (29%)Ships in 1-3 Business Days
Scion xB Drive Belt
If you're thinking about purchasing OEM parts for your Scion xB, our website is your one-stop destination. We stock an extensive selection of genuine Scion xB Drive Belt at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Scion xB Drive Belt Parts Questions & Experts Answers
- Q: How to replace the drive belt on Scion xB?A: The process of drive belt replacement begins by removing the fan and generator V-belt through step-wise procedure which involves loosening bolts A and B followed by releasing V-ribbed belt tension and ultimately removing the belt. The first step should be to remove the RH engine under cover before handling the vane pump V-belt through bolts A and B by releasing the V-ribbed belt tension for removal. You must put the V-ribbed belt temporarily on each pulley before installing the vane pump V-belt. Repeat this step for the fan and generator V-belt installation. Adjust the fan and generator V-belt tension using an adjusting bar that should be inserted between the engine RH mount bracket and generator to pull towards the vehicle front but must avoid placing the bar near the oil control valve to prevent generator damage. Start with tightening bolt A to 19 Nm before securing bolt B to 54 Nm (550 kgf-cm, 40 ft. lbs.). To adjust the tension on the vane pump V-belt it is essential to start by tightening bolt B to 44 Nm (449 kgf-cm, 33 ft. lbs.) before proceeding to bolt A. After adjusting the tension run an inspection of the drive belt deflection while also inspecting the tension before reinstalling the engine under cover RH with bolt and nut torqued to 5.0 Nm (51 kgf-cm, 44 inch lbs.) each.
