How to install the Fuel Level Sensor assembly and related components on 2010 Scion xB?

Fitting the fuel level sensor gauge assembly requires a downward tilt followed by proper wire harness installation without harming the unit. You need to put in the harness protector followed by connecting the fuel level sensor gauge connector. The next step involves plugging in the fuel suction and pump alongside its gauge tube assembly followed by the fuel pump gauge retainer. The fuel tank main tube sub-assembly installation requires connection to the system while service hole cover installation occurs at the rear floor. Check for fuel leakage before implementing the rear seat cushion with cover pad sub-assembly.

OEM 2010 Scion xB Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Level Sensor found

View related parts
2010 Scion xB Fuel Gauge Sending Unit
Part Number: 83320-12810
$77.37 MSRP: $108.61
You Save: $31.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Part Name Code: 83320
- Item Weight: 1.90 Pounds
- Item Dimensions: 14.5 x 10.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 83320-12810
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2010 Scion xB Fuel Level Sensor

Looking for affordable OEM 2010 Scion xB Fuel Level Sensor? Explore our comprehensive catalogue of genuine 2010 Scion xB Fuel Level Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xB Fuel Level Sensor Parts Q&A

Q: How to install the Fuel Level Sensor assembly and related components on 2010 Scion xB?
A: Fitting the fuel level sensor gauge assembly requires a downward tilt followed by proper wire harness installation without harming the unit. You need to put in the harness protector followed by connecting the fuel level sensor gauge connector. The next step involves plugging in the fuel suction and pump alongside its gauge tube assembly followed by the fuel pump gauge retainer. The fuel tank main tube sub-assembly installation requires connection to the system while service hole cover installation occurs at the rear floor. Check for fuel leakage before implementing the rear seat cushion with cover pad sub-assembly.