Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Front Right; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side
Manufacturer Note: SRS AIR BAG-W(SIDE & CURTAIN SHIELD)
Position: Passenger Side
Part Name Code: 89860
Item Weight: 0.60 Pounds
Item Dimensions: 4.3 x 2.6 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89860-21031
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left; Sensor, Seat Position Air Bag
Position: Driver Side
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.1 x 1.5 x 1.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-33040
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
Base, Spec | 4 Cyl 2.4 L GAS
2010 Scion tC Air Bag Sensor
Looking for affordable OEM 2010 Scion tC Air Bag Sensor? Explore our comprehensive catalogue of genuine 2010 Scion tC Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2010 Scion tC Parts Questions & Experts Answers
Q: How to install the side Air Bag sensor assembly on the LH side on 2010 Scion tC?
A: The side Air Bag sensor assembly installation on the LH side requires 2 nuts and one bolt to be secured while measuring torque at 9.0 Nm (92 kgf-cm, 82 in-lbf). A new sensor should replace damaged equipment if the Air Bag sensor either suffered drops or presents case defects or dents or bracket damages or connector flaws. When installing the SRS wiring check that it maintains clear space from all surrounding parts and makes sure every part that requires installation remains secure before attaching the connector. Begin with the front door service hole cover LH and follow that by installing the front door inside handle sub-assembly LH then the front door trim board sub-assembly LH. The front armrest base panel upper LH needs switch connector installation followed by clip attachment and securing it against the window regulator master switch with the aid of five claws. As the next step, install both the assist grip cover LH followed by the front door lower frame bracket garnish LH. The negative battery terminal needs cable connection followed by initialization processes which particular systems require after negative battery terminal removal. Check the SRS warning light after installation to guarantee appropriate system function.