Other Name: Shaft Assembly, Propeller; Driveshaft; Drive Shaft Assembly
Item Weight: 26.30 Pounds
Condition: New
SKU: 37100-0C114
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following 2009 Toyota Tundra Submodels:
Base, Limited, SR5 | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
2009 Toyota Tundra Drive Shaft
Looking for affordable OEM 2009 Toyota Tundra Drive Shaft? Explore our comprehensive catalogue of genuine 2009 Toyota Tundra Drive Shaft. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Tundra Drive Shaft Parts Q&A
Q: How to install the front Drive Shaft assembly on 2009 Toyota Tundra?
A: The front propeller shaft assembly installation requires alignment of the matchmarks between differential and propeller shaft flange before using 4 washers to secure the 4 nuts through torquing to 80 Nm (816 kgf-cm, 59 ft-lbf). The right step involves aligning transfer and propeller shaft flange matchmarks followed by using 4 washers and 4 nuts to connect the propeller shaft before torquing the nuts to 80 Nm (816 kgf-cm, 59 ft-lbf). Install the propeller shaft heat insulator bracket sub-assembly to the crossmember through 2 bolts and torque them to 16 Nm (163 kgf-cm, 12 ft-lbf). The heat insulator attachment to the bracket occurs with two bolts at 16 Nm (163 kgf-cm, 12 ft-lbf) torque.