My Garage
Cart

OEM 2009 Toyota Matrix Yaw Sensor

Yaw Rate Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

  • 2009 Toyota Matrix Yaw Sensor - 89180-12090
    2009 Toyota Matrix Yaw Sensor Diagram - 89180-12090
    View related parts

    2009 Toyota Matrix Yaw Rate Sensor

    Part Number: 89180-12090
    $1002.99 MSRP: $1469.89
    You Save: $466.90 (32%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor Assembly, Yawrate; Suspension Yaw Sensor; Yaw Sensor
    • Part Name Code: 89180
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 5.5 x 4.2 x 3.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 89180-12090
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2009 Toyota Matrix Submodels:
    • Base, S, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS

2009 Toyota Matrix Yaw Sensor

Looking for affordable OEM 2009 Toyota Matrix Yaw Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Matrix Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Matrix Yaw Sensor Parts Q&A

  • Q: How to install a Yaw Sensor on 2009 Toyota Matrix?
    A: Begin the Yaw Rate and Acceleration Sensor installation by firmly connecting the connector along with the clamp to the sensor device. Thread the claw of the sensor bracket through the sensor until the bracket is set and fasten it in place by using two bolts with 20 Nm (204 kgf-cm, 15 ft-lbf). The installation process requires checking that no foreign objects bond to the sensor bracket-body contact surfaces yet confirming proper attachment of the sensor. The front seat assembly should be installed after which the cable must be attached to the negative battery terminal. Examine and readjust both zero points of yaw rate and acceleration sensor then check the SRS warning light.