OEM 2009 Toyota FJ Cruiser Parking Brake Cable

2009 Toyota FJ Cruiser Parts Questions & Experts Answers

• Q: How to remove the parking brake cable on 2009 Toyota FJ Cruiser?

  A: Starting the removal process of the parking brake cable requires the removal of the parking brake hole cover sub-assembly. During the process, users must remove the shift lever knob sub-assembly from manual transmission vehicles and repeat this step for 4WD vehicles. Begin by unmounting the console upper rear panel sub-assembly then take away both box bottom mat and front console box. You should detach the rear disc brake caliper assembly before removing the rear disc when working on rear wheel maintenance. The service technician should unfasten the parking brake shoe return tension spring alongside the parking brake shoe strut before disconnecting the parking brake shoe. The right-hand side demands removing the parking brake cable heat insulator after taking out its two bolts. The process to detach the parking brake cable includes loosening the adjusting nut followed by disconnecting the cable end from the parking brake pull rod while contracting the spring cap claws to push the parking brake cable slightly out from the vehicle. Loosen 2 bolts to detach the parking brake cable from the parking brake plate after which proceed by taking out 5 bolts and the parking brake cable. You must detach the parking brake cable clamp from the parking brake cable as your last step.