OEM 2009 Toyota FJ Cruiser Alternator

2009 Toyota FJ Cruiser Alternator Parts Q&A

• Q: How to install the alternator assembly on 2009 Toyota FJ Cruiser?

  A: The generator assembly should be fastened through 2 bolts with a torque of 43 Nm (438 kgf-cm, 32 ft-lbf). Fasten the wire harness clamp bracket with 2 bolts at their correct torque of 8.0 Nm (82 kgf-cm, 71 in-lbf). Affix the wire harness to terminal B while tightening the nut to 10 Nm (100 kgf-cm, 7 ft-lbf) and link the connector to the generator assembly and attach the wire harness stay with a bolt tightened to 5.8 Nm (59 kgf-cm, 51 in-lbf). The next sequence involves putting on the fan and generator V belt before installing the No. 1 engine under cover sub-assembly until completion with the V-bank cover installation. The battery installation requires a torque of 3.9 Nm when measured with 40 kgf-cm and 35 in-lbf.