How to install the front and tail exhaust pipe assemblies on 2009 Toyota Corolla?

The installation process for front exhaust pipes begins with spring measurement with a vernier caliper followed by replacement when the measurement falls below the minimum threshold. A new gasket should be fully inserted into the exhaust manifold before using a plastic hammer and wooden block to tap it into correct position and verify that it has the same manifold height without damaging or reusing the gasket. It is essential to prevent using the exhaust pipe for gasket insertion. Secure the front exhaust pipe assembly to the 2 exhaust pipe supports through the application of 2 bolts and 2 compression springs which need installation torque to 43 Nm (440 kgf-cm, 32 ft-lbf). The heated oxygen sensor needs installation according to manufacturer instructions. The assembly of tail exhaust pipe requires checking the compression spring free length before performing replacement if needed. The front exhaust pipe assembly requires a fresh gasket insertion with protocols for correct placement and no reuse and no damage to the components. The 2 exhaust pipe supports require the tail exhaust pipe assembly connection with 2 bolts and 2 compression springs that need to be torqued to 43 Nm (440 kgf-cm, 32 ft-lbf). The final examination includes checking for exhaust gas leakages.

OEM 2009 Toyota Corolla Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Exhaust Pipes found

View related parts
2009 Toyota Corolla Muffler & Pipe
Part Number: 17430-0T060
$399.05 MSRP: $535.65
You Save: $136.60 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.40 Pounds
- Item Dimensions: 44.9 x 12.3 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0T060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- S | 4 Cyl 1.8 L GAS
View related parts
2009 Toyota Corolla Muffler & Pipe
Part Number: 17430-0T050
$399.05 MSRP: $535.65
You Save: $136.60 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.80 Pounds
- Item Dimensions: 43.6 x 12.7 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0T050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- Base, L, LE, XLE | 4 Cyl 1.8 L GAS
View related parts
2009 Toyota Corolla Muffler & Pipe
Part Number: 17430-0D460
$399.05 MSRP: $535.65
You Save: $136.60 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.40 Pounds
- Item Dimensions: 43.2 x 12.3 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0D460
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- XRS | 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Corolla Muffler & Pipe
Part Number: 17430-37280
$395.08 MSRP: $530.31
You Save: $135.23 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 11.10 Pounds
- Item Dimensions: 44.0 x 12.7 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-37280
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- Base, L, LE, S, XLE | 4 Cyl 1.8 L GAS
View related parts
2009 Toyota Corolla Front Pipe
Part Number: 17410-0D440
$228.56 MSRP: $298.89
You Save: $70.33 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Part Name Code: 17410
- Item Weight: 11.70 Pounds
- Item Dimensions: 48.2 x 18.0 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0D440
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- XRS | 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Corolla Converter & Pipe, Front
Part Number: 17410-37260
$1689.78 MSRP: $2268.17
You Save: $578.39 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Part Name Code: 17410
- Item Weight: 11.80 Pounds
- Item Dimensions: 47.2 x 18.0 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-37260
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- Base, LE, S, XLE | 4 Cyl 1.8 L GAS
View related parts
2009 Toyota Corolla Intermediate Pipe, Center
Part Number: 17420-0D150
$947.94 MSRP: $1272.41
You Save: $324.47 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Pipe; Catalytic Converter; Converter & Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.40 Pounds
- Item Dimensions: 50.4 x 19.6 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-0D150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- Base, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Corolla Front Pipe
Part Number: 17410-0T080
$1736.65 MSRP: $2331.09
You Save: $594.44 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Part Name Code: 17410
- Item Weight: 11.10 Pounds
- Item Dimensions: 47.7 x 18.0 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0T080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- Base, LE, S, XLE | 4 Cyl 1.8 L GAS

2009 Toyota Corolla Exhaust Pipe

Looking for affordable OEM 2009 Toyota Corolla Exhaust Pipe? Explore our comprehensive catalogue of genuine 2009 Toyota Corolla Exhaust Pipe. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Corolla Exhaust Pipe Parts Q&A

Q: How to install the front and tail exhaust pipe assemblies on 2009 Toyota Corolla?
A: The installation process for front exhaust pipes begins with spring measurement with a vernier caliper followed by replacement when the measurement falls below the minimum threshold. A new gasket should be fully inserted into the exhaust manifold before using a plastic hammer and wooden block to tap it into correct position and verify that it has the same manifold height without damaging or reusing the gasket. It is essential to prevent using the exhaust pipe for gasket insertion. Secure the front exhaust pipe assembly to the 2 exhaust pipe supports through the application of 2 bolts and 2 compression springs which need installation torque to 43 Nm (440 kgf-cm, 32 ft-lbf). The heated oxygen sensor needs installation according to manufacturer instructions. The assembly of tail exhaust pipe requires checking the compression spring free length before performing replacement if needed. The front exhaust pipe assembly requires a fresh gasket insertion with protocols for correct placement and no reuse and no damage to the components. The 2 exhaust pipe supports require the tail exhaust pipe assembly connection with 2 bolts and 2 compression springs that need to be torqued to 43 Nm (440 kgf-cm, 32 ft-lbf). The final examination includes checking for exhaust gas leakages.

Alternate Year Models

2008 Toyota Corolla Exhaust Pipe 2010 Toyota Corolla Exhaust Pipe