How to remove the parking brake cable on 2009 Toyota Camry?

The first step to remove the parking brake cable requires users to disconnect the negative battery terminal then wait 90 seconds to avert Air Bag activation. First detach the front seat assembly from both sides for manual and power seats and then unfasten the sub-assembly of parking brake lever when using a manual transaxle. The first step includes separate removal of the No. 1 parking brake cable assembly for both manual and automatic transaxles before proceeding to detach the parking brake pedal assembly in automatic transaxles. The technician performs sequential removal of the luggage door lock open lever sub-assembly and front floor carpet assembly and cross member floor No. 4 reinforcement sub-assembly for automatic transaxle. Before disconnecting the second part of the parking brake assembly begin by removing the No. 3 parking brake cable assembly from its connection with the parking brake equalizer. Detach the No. 4 parking brake cable assembly by means of sliding the rubber boot off before removing it from the parking brake equalizer. The removal of center exhaust pipe assembly applies to 2AZ-FE while 2GR-FE requires removal of exhaust tail pipe assembly combined with exhaust center pipe assembly. The three nuts holding down the No. 2 front floor heat lower insulator must be removed before lifting the rear wheel. The brake caliper assembly needs separate disassembly before removing the rear disc. The servicing process continues with removal of the parking brake shoe return tension No. 1 spring followed by the parking brake shoe strut and both the No. 1 parking brake shoe assembly and the parking brake shoe adjusting screw set and the No. 2 parking brake shoe assembly. The procedure ends with No. 3 parking brake cable assembly removal that requires backing plate bolt detachment using needle-nose pliers to access the clip which allows disengagement of bolts and nut until the assembly with parking brake cable clamp can be extracted from the body.

OEM 2009 Toyota Camry Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Parking Brake Cables found

View related parts
2009 Toyota Camry Rear Cable
Part Number: 46430-06160
$84.83 MSRP: $119.08
You Save: $34.25 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46430
- Item Weight: 2.30 Pounds
- Item Dimensions: 18.1 x 13.5 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-06160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Rear Cable
Part Number: 46430-06090
$84.00 MSRP: $117.91
You Save: $33.91 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-33140
- Part Name Code: 46430
- Item Weight: 2.40 Pounds
- Item Dimensions: 17.6 x 12.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-06090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Rear Cable
Part Number: 46420-06160
$84.00 MSRP: $117.91
You Save: $33.91 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46420
- Item Weight: 2.70 Pounds
- Item Dimensions: 17.5 x 12.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-06160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Rear Cable
Part Number: 46420-06090
$70.38 MSRP: $98.79
You Save: $28.41 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-33140
- Part Name Code: 46420
- Item Weight: 2.60 Pounds
- Item Dimensions: 16.8 x 12.4 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-06090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Front Cable
Part Number: 46410-33150
$35.12 MSRP: $48.89
You Save: $13.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46410
- Item Weight: 2.00 Pounds
- Item Dimensions: 16.0 x 11.5 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-33150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Front Cable
Part Number: 46410-06070
$73.46 MSRP: $103.11
You Save: $29.65 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Manufacturer Note: (L)
- Replaces: 46410-33170
- Part Name Code: 46410
- Item Weight: 2.00 Pounds
- Item Dimensions: 16.5 x 12.2 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-06070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Rear Cable
Part Number: 46420-06180
$81.87 MSRP: $114.92
You Save: $33.05 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46420
- Item Weight: 2.70 Pounds
- Item Dimensions: 17.3 x 12.6 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-06180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)

2009 Toyota Camry Parking Brake Cable

Looking for affordable OEM 2009 Toyota Camry Parking Brake Cable? Explore our comprehensive catalogue of genuine 2009 Toyota Camry Parking Brake Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Camry Parts Questions & Experts Answers

Q: How to remove the parking brake cable on 2009 Toyota Camry?
A: The first step to remove the parking brake cable requires users to disconnect the negative battery terminal then wait 90 seconds to avert Air Bag activation. First detach the front seat assembly from both sides for manual and power seats and then unfasten the sub-assembly of parking brake lever when using a manual transaxle. The first step includes separate removal of the No. 1 parking brake cable assembly for both manual and automatic transaxles before proceeding to detach the parking brake pedal assembly in automatic transaxles. The technician performs sequential removal of the luggage door lock open lever sub-assembly and front floor carpet assembly and cross member floor No. 4 reinforcement sub-assembly for automatic transaxle. Before disconnecting the second part of the parking brake assembly begin by removing the No. 3 parking brake cable assembly from its connection with the parking brake equalizer. Detach the No. 4 parking brake cable assembly by means of sliding the rubber boot off before removing it from the parking brake equalizer. The removal of center exhaust pipe assembly applies to 2AZ-FE while 2GR-FE requires removal of exhaust tail pipe assembly combined with exhaust center pipe assembly. The three nuts holding down the No. 2 front floor heat lower insulator must be removed before lifting the rear wheel. The brake caliper assembly needs separate disassembly before removing the rear disc. The servicing process continues with removal of the parking brake shoe return tension No. 1 spring followed by the parking brake shoe strut and both the No. 1 parking brake shoe assembly and the parking brake shoe adjusting screw set and the No. 2 parking brake shoe assembly. The procedure ends with No. 3 parking brake cable assembly removal that requires backing plate bolt detachment using needle-nose pliers to access the clip which allows disengagement of bolts and nut until the assembly with parking brake cable clamp can be extracted from the body.