How do you install the Back Up Light Switch assembly on 2009 Scion tC?

The first step for installing the Back Up light switch assembly requires placing the assembly inside the transmission. After installation of the Back Up light switch assembly you must attach the cable to the negative terminal of the battery. Following cable removal, initialization should be performed because specific systems demand this protocol when connecting or disconnecting the negative (-) cable from the battery terminal.

OEM 2009 Scion tC Back Up Light Switch

Reverse Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Back Up Light Switch found

View related parts
2009 Scion tC Switch Assembly, Back-Up Lamp
Part Number: 84210-52050
$41.68 MSRP: $58.01
You Save: $16.33 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Back-Up; Back Up Light Switch
- Replaces: 84210-12040
- Part Name Code: 84210
- Item Weight: 0.50 Pounds
- Item Dimensions: 14.2 x 11.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84210-52050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS

2009 Scion tC Back Up Light Switch

Looking for affordable OEM 2009 Scion tC Back Up Light Switch? Explore our comprehensive catalogue of genuine 2009 Scion tC Back Up Light Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Scion tC Parts Questions & Experts Answers

Q: How do you install the Back Up Light Switch assembly on 2009 Scion tC?
A: The first step for installing the Back Up light switch assembly requires placing the assembly inside the transmission. After installation of the Back Up light switch assembly you must attach the cable to the negative terminal of the battery. Following cable removal, initialization should be performed because specific systems demand this protocol when connecting or disconnecting the negative (-) cable from the battery terminal.