How to install a Vapor Canister on 2008 Toyota Solara?

Begin charcoal canister assembly installation for 2AZ-FE emission control by putting bolts and clip with the canister and tighten them to 39 Nm (398 kgf-cm, 29 ft-lbf). The procedure begins with connecting the purge line hose to the charcoal canister then installing the wire harness clamp followed by connecting the vapor pressure sensor connector. You should first install the charcoal canister filter sub-assembly to the charcoal canister and then connect the fuel tank vent hose to this same assembly. The last step should be to install the fuel tank assembly.

OEM 2008 Toyota Solara Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vapor Canister found

View related parts
2008 Toyota Solara Vapor Canister
Part Number: 77740-07020
$209.57 MSRP: $299.22
You Save: $89.65 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister Assembly, Charcoal
- Part Name Code: 77740
- Item Weight: 4.30 Pounds
- Item Dimensions: 20.8 x 9.3 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 77740-07020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Solara Submodels:
- SE, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS

2008 Toyota Solara Vapor Canister

Looking for affordable OEM 2008 Toyota Solara Vapor Canister? Explore our comprehensive catalogue of genuine 2008 Toyota Solara Vapor Canister. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Solara Parts Questions & Experts Answers

Q: How to install a Vapor Canister on 2008 Toyota Solara?
A: Begin charcoal canister assembly installation for 2AZ-FE emission control by putting bolts and clip with the canister and tighten them to 39 Nm (398 kgf-cm, 29 ft-lbf). The procedure begins with connecting the purge line hose to the charcoal canister then installing the wire harness clamp followed by connecting the vapor pressure sensor connector. You should first install the charcoal canister filter sub-assembly to the charcoal canister and then connect the fuel tank vent hose to this same assembly. The last step should be to install the fuel tank assembly.

Related 2008 Toyota Solara Parts

Alternate Year Models

2007 Toyota Solara Vapor Canister