How to remove the parking brake cable assembly No. 3 on 2008 Toyota Sienna?

Beginning with rear wheel removal you should proceed with drum sub-assembly detachment for drum type vehicles which must be followed by front and rear shoe removal for drum type vehicles until the parking brake cable assembly No. 3 can be reached. The rear disc brake caliper assembly LH requires two steps before removing the rear disc which belongs to disc type vehicles. The parking brake shoe assembly LH No.1 need removal along with its parking brake shoe adjusting screw set followed by the parking brake shoe strut LH and completion with removal of parking brake shoe assembly LH No.2. The parking brake cable assembly No.3 must be separated from the backing plate after removing its 2 bolts and disconnecting it. The third parking brake cable assembly can be detached by first removing three bolts along with the button that releases it from the body structure then separating it from the equalizer before extracting the LH guide from the cable assembly.

OEM 2008 Toyota Sienna Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Parking Brake Cables found

View related parts
2008 Toyota Sienna Front Cable
Part Number: 46410-08030
$100.83 MSRP: $141.53
You Save: $40.70 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46410
- Item Weight: 3.20 Pounds
- Item Dimensions: 16.1 x 11.7 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-08030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Rear Cable
Part Number: 46420-08030
$74.17 MSRP: $104.11
You Save: $29.94 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46420
- Item Weight: 1.50 Pounds
- Item Dimensions: 17.2 x 12.7 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-08030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Front Cable
Part Number: 46410-08040
$100.83 MSRP: $141.53
You Save: $40.70 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46410
- Item Weight: 2.90 Pounds
- Item Dimensions: 15.5 x 12.0 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-08040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Rear Cable
Part Number: 46430-08030
$81.16 MSRP: $113.92
You Save: $32.76 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46430
- Item Weight: 2.40 Pounds
- Item Dimensions: 18.5 x 13.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-08030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Rear Cable
Part Number: 46430-08020
$79.86 MSRP: $112.09
You Save: $32.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46430
- Item Weight: 2.40 Pounds
- Item Dimensions: 17.9 x 13.0 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-08020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Rear Cable
Part Number: 46420-08020
$74.17 MSRP: $104.11
You Save: $29.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46420
- Item Weight: 2.70 Pounds
- Item Dimensions: 16.7 x 12.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-08020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota Sienna Parking Brake Cable

Looking for affordable OEM 2008 Toyota Sienna Parking Brake Cable? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Parking Brake Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sienna Parking Brake Cable Parts Q&A

Q: How to remove the parking brake cable assembly No. 3 on 2008 Toyota Sienna?
A: Beginning with rear wheel removal you should proceed with drum sub-assembly detachment for drum type vehicles which must be followed by front and rear shoe removal for drum type vehicles until the parking brake cable assembly No. 3 can be reached. The rear disc brake caliper assembly LH requires two steps before removing the rear disc which belongs to disc type vehicles. The parking brake shoe assembly LH No.1 need removal along with its parking brake shoe adjusting screw set followed by the parking brake shoe strut LH and completion with removal of parking brake shoe assembly LH No.2. The parking brake cable assembly No.3 must be separated from the backing plate after removing its 2 bolts and disconnecting it. The third parking brake cable assembly can be detached by first removing three bolts along with the button that releases it from the body structure then separating it from the equalizer before extracting the LH guide from the cable assembly.