×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Toyota RAV4 A/C Compressor
Air Conditioning Compressor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Compressors found
2008 Toyota RAV4 Compressor Assembly
Part Number: 88310-42270$452.97 MSRP: $616.83You Save: $163.86 (27%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Compressor Assembly, With Pulley; A/C Compressor; New A/C Compressor; Compressor; Compressor Assembly, W/Pulley
- Part Name Code: 88310
- Item Weight: 15.80 Pounds
- Item Dimensions: 13.3 x 11.6 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88310-42270
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota RAV4 Compressor Assembly
Part Number: 88320-42120-84$441.21 MSRP: $647.89You Save: $206.68 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Reman Compressor; A/C Compressor; Compressor
- Item Weight: 16.20 Pounds
- Item Dimensions: 11.4 x 7.9 x 8.2 inches
- Condition: New
- SKU: 88320-42120-84
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota RAV4 A/C Compressor
Looking for affordable OEM 2008 Toyota RAV4 A/C Compressor? Explore our comprehensive catalogue of genuine 2008 Toyota RAV4 A/C Compressor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota RAV4 A/C Compressor Parts Q&A
- Q: How to install the A/C Compressor and pulley on 2008 Toyota RAV4?A: The air conditioning compressor and pulley installation requires adjusting the compressor oil through refrigerator gas service valve discharge and manual oil drainage from new components that totals 130 + 15 cc (4.6 + 0.51 fl.oz.) and includes remaining oil from previous components. The procedure of checking the compressor oil requires safe handling of coolers during removal and installation because both excessive or insufficient oil will affect the refrigerant's operation. The oil system requires ND-OIL 8 as its specific product or any approved substitute as compressor fluid. To install the cooler compressor assembly either without or with a stud bolt you should tighten four bolts to 24.5 Nm (250 kgf-cm, 18 ft-lbf) or use three bolts with a nut following the same torque setting. Installation of the No. 1 discharge hose starts by removing vinyl tape, applying compressor oil to both the fitting surface and new ring before installation with a bolt tightened to 9.8 Nm (100 kgf-cm, 7 ft-lbf). Repetition of this installation method should occur for the No. 1 cooler refrigerant suction hose. The procedure requires installation of the fan and generator V belt alongside the No. 1 engine under cover and connecting the cable to the negative battery terminal. The last step includes charging the refrigerant while allowing the engine to warm during an examination for leaking refrigerant.