How to install the rear speed sensor for the brake control system on 2008 Toyota Highlander?

Installing the rear speed sensor for the brake control system requires cleaning the contact surface between the rear axle hub and bearing assembly and new rear speed sensor so foreign matter does not attach to the rotor. The procedure begins with correct positioning of the rear speed sensor on the axle hub where the connector faces correctly. Special Service Tools 09214-76011 09213-58013 along with steel plates and V-blocks and a press assist the installation but minimize exposure to magnets and eliminate hammer use during installation. Press the sensor into position straight while inspecting that no iron chips exist on the sensor's detecting area. You should begin by installing the rear speed sensor appended to the rear axle hub and bearing assembly. Confirm proper bearing looseness and hub runout before installing the rear disc and rear disc brake caliper assembly. Connect the rear speed sensor wire to its connector but only use the correct torque of 103 Nm (1050 kgf-cm; 76 ft-lbf) to install the rear wheel before reconnecting the cable to the negative battery terminal. Systems that need initialization after reconnection exist. Close the inspection by checking the rear wheel alignment and testing the speed sensor signal.

OEM 2008 Toyota Highlander Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Speed Sensors found

View related parts
2008 Toyota Highlander Rear Speed Sensor, Passenger Side
Part Number: 89545-0E050
$242.54 MSRP: $346.29
You Save: $103.75 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Right-Hand; ABS Wheel Speed Sensor; ABS Sensor; ABS Sensor Wire; Sensor, Speed, Rear Passenger Side
- Position: Rear Passenger Side
- Replaces: 89545-48040
- Part Name Code: 89545
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.0 x 6.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89545-0E050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Front Speed Sensor, Driver Side
Part Number: 89543-48040
$238.00 MSRP: $339.81
You Save: $101.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor; ABS Sensor; ABS Sensor Wire; Sensor, Speed, Front Driver Side
- Position: Front Driver Side
- Part Name Code: 89543
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.3 x 6.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-48040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Rear Speed Sensor, Driver Side
Part Number: 89546-0E040
$238.00 MSRP: $339.81
You Save: $101.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Left-Hand; ABS Wheel Speed Sensor; ABS Sensor; ABS Sensor Wire; Sensor, Speed, Rear Driver Side
- Position: Rear Driver Side
- Replaces: 89546-48040
- Part Name Code: 89546
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.3 x 6.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89546-0E040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Rear Speed Sensor
Part Number: 89544-28010
$174.12 MSRP: $211.72
You Save: $37.60 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor Tone Ring; ABS Sensor; ABS Rotor
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.9 x 6.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-28010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Front Speed Sensor, Passenger Side
Part Number: 89542-48040
$242.54 MSRP: $346.29
You Save: $103.75 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor; ABS Sensor; ABS Sensor Wire; Sensor, Speed, Front Passenger Side
- Position: Front Passenger Side
- Part Name Code: 89542
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.0 x 6.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-48040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS

2008 Toyota Highlander Speed Sensor

Looking for affordable OEM 2008 Toyota Highlander Speed Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Highlander Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Highlander Parts Questions & Experts Answers

Q: How to install the rear speed sensor for the brake control system on 2008 Toyota Highlander?
A: Installing the rear speed sensor for the brake control system requires cleaning the contact surface between the rear axle hub and bearing assembly and new rear speed sensor so foreign matter does not attach to the rotor. The procedure begins with correct positioning of the rear speed sensor on the axle hub where the connector faces correctly. Special Service Tools 09214-76011 09213-58013 along with steel plates and V-blocks and a press assist the installation but minimize exposure to magnets and eliminate hammer use during installation. Press the sensor into position straight while inspecting that no iron chips exist on the sensor's detecting area. You should begin by installing the rear speed sensor appended to the rear axle hub and bearing assembly. Confirm proper bearing looseness and hub runout before installing the rear disc and rear disc brake caliper assembly. Connect the rear speed sensor wire to its connector but only use the correct torque of 103 Nm (1050 kgf-cm; 76 ft-lbf) to install the rear wheel before reconnecting the cable to the negative battery terminal. Systems that need initialization after reconnection exist. Close the inspection by checking the rear wheel alignment and testing the speed sensor signal.