Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS
2008 Toyota Camry Exhaust Pipe
Looking for affordable OEM 2008 Toyota Camry Exhaust Pipe? Explore our comprehensive catalogue of genuine 2008 Toyota Camry Exhaust Pipe. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Camry Exhaust Pipe Parts Q&A
Q: How to install the exhaust pipe on 2008 Toyota Camry?
A: The installation of the 2AZ-FE engine exhaust pipe starts with front exhaust pipe No. 1 support bracket installation through 2 nuts with proper orientation followed by 33 Nm (337 kgf-cm, 24 ft-lbf) torque. The installation process includes fitting the heated oxygen sensor after it. After putting a new gasket on the front exhaust pipe assembly install 2 nuts while torquing them to 43 Nm (438 kgf-cm, 32 ft-lbf). Afterward, fasten the front exhaust pipe No. 1 support bracket using 2 nuts which require 33 Nm (337 kgf-cm, 24 ft-lbf) torque. The front exhaust pipe requires installation of a new gasket followed by attachment with two bolts and two nuts that should be torqued at 43 Nm (438 kgf-cm, 32 ft-lbf). First install the front exhaust pipe against the tail pipe assembly and attach it using 2 nuts which require a torque of 43 Nm (438 kgf-cm, 32 ft-lbf). Inspect exhaust gas leaks while performing necessary repairs of damaged parts to achieve proper leak prevention.