How to install the thermostat on 2008 Toyota 4Runner?

During the installation of the 2UZ-FE cooling system thermostat begin by placing a new gasket onto the thermostat. You should insert the thermostat into the water inlet housing so that the jiggle valve faces upwards in a direct vertical position but the valve can be located at 30 degrees or 60 degrees relative to the specified orientation. The water inlet housing installation requires 3 nuts which should be tightened to a torque value of 19 Nm (195 kgf-cm, 14 ft-lbf). Fill engine coolant as the last step.

OEM 2008 Toyota 4Runner Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

View related parts
2008 Toyota 4Runner Thermostat
Part Number: 90916-03138
$41.45 MSRP: $57.70
You Save: $16.25 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Manufacturer Note: *WAX 82-95
- Part Name Code: 16331A
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.6 x 2.6 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-03138
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 8 Cyl 4.7 L GAS

2008 Toyota 4Runner Thermostat

Looking for affordable OEM 2008 Toyota 4Runner Thermostat? Explore our comprehensive catalogue of genuine 2008 Toyota 4Runner Thermostat. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota 4Runner Parts Questions & Experts Answers

Q: How to install the thermostat on 2008 Toyota 4Runner?
A: During the installation of the 2UZ-FE cooling system thermostat begin by placing a new gasket onto the thermostat. You should insert the thermostat into the water inlet housing so that the jiggle valve faces upwards in a direct vertical position but the valve can be located at 30 degrees or 60 degrees relative to the specified orientation. The water inlet housing installation requires 3 nuts which should be tightened to a torque value of 19 Nm (195 kgf-cm, 14 ft-lbf). Fill engine coolant as the last step.

Related 2008 Toyota 4Runner Parts

Alternate Year Models

2007 Toyota 4Runner Thermostat 2009 Toyota 4Runner Thermostat