OEM 2008 Scion xD Clutch Master Cylinder

2008 Scion xD Clutch Master Cylinder Parts Q&A

• Q: How to install the clutch master cylinder on 2008 Scion xD?

  A: Begin by installing the lock nut onto the push rod followed by attaching the push rod clevis until the lock nut achieves proper tension with the dimension A matching its measurement. You must attach the clutch master cylinder assembly with two nuts according to a torque specification of 9.0 Nm (92 kgf-cm, 80 in-lbf). The union nut wrench should be torqued to 14 Nm (144 kgf-cm, 10 ft-lbf) to connect the clutch master cylinder to the flexible hose tube yet omitting the union nut results in a torque of 15 Nm (155 kgf-cm, 11 ft-lbf). The required torque can be reached when using a torque wrench equipped with a 300 mm (11.8 in.) fulcrum while employing a union nut wrench with its own 22 mm (0.866 in.) fulcrum and maintaining the union nut wrench and torque wrench parallel to one another. To complete the task install the brake booster assembly followed by inspection and adjustment of the clutch pedal sub-assembly before installing the instrument panel under tray and finishing with the No. 1 instrument panel under cover sub-assembly.