How to install the Fuel Level Sensor assembly and related components on 2008 Scion xB?

The installation process of the fuel level sensor gauge assembly begins by descending it and then installing the wire harness without causing any damage. After obtained the harness protector you should attach the fuel level sensor gauge connector. You should install the fuel suction parts and pump along with gauge tube assembly before installing the fuel pump gauge retainer. Mount the rear floor service hole cover and connect the fuel tank main tube sub-assembly. The last step concludes with inspecting for fuel leaks before you install the rear seat cushion with its cover pad sub-assembly.

OEM 2008 Scion xB Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Level Sensor found

View related parts
2008 Scion xB Fuel Gauge Sending Unit
Part Number: 83320-12810
$77.37 MSRP: $108.61
You Save: $31.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Part Name Code: 83320
- Item Weight: 1.90 Pounds
- Item Dimensions: 14.5 x 10.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 83320-12810
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2008 Scion xB Fuel Level Sensor

Looking for affordable OEM 2008 Scion xB Fuel Level Sensor? Explore our comprehensive catalogue of genuine 2008 Scion xB Fuel Level Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion xB Fuel Level Sensor Parts Q&A

Q: How to install the Fuel Level Sensor assembly and related components on 2008 Scion xB?
A: The installation process of the fuel level sensor gauge assembly begins by descending it and then installing the wire harness without causing any damage. After obtained the harness protector you should attach the fuel level sensor gauge connector. You should install the fuel suction parts and pump along with gauge tube assembly before installing the fuel pump gauge retainer. Mount the rear floor service hole cover and connect the fuel tank main tube sub-assembly. The last step concludes with inspecting for fuel leaks before you install the rear seat cushion with its cover pad sub-assembly.