How to install the Oxygen Sensor for Bank 1 Sensor 1 on 2008 Scion tC?

The installation of Air Fuel Ratio Sensor for Bank 1 Sensor 1 requires Special Service Tool: 09224-00010 to fasten the sensor onto the exhaust manifold at a recommended torque of 40 Nm (408 kgf-cm, 30 ft-lbf) when using the tool but the torque can be increased to 44 Nm (449 kgf-cm, 32 ft-lbf) without the tool. A torque wrench with a 30 cm (11.81 in.) fulcrum length is suggested. When installation is complete connect first the sensor connector and then the cable should go to the negative battery terminal. Initialization procedures are required since some systems need it when reconnecting or disconnecting the negative (-) battery terminal. Complete the installation procedure by verifying exhaust gas leakages.

OEM 2008 Scion tC Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oxygen Sensors found

View related parts
2008 Scion tC Oxygen Sensor, Front
Part Number: 89467-06030
$195.94 MSRP: $279.76
You Save: $83.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor, Front; Sensor; Sensor, Air Fuel Ratio
- Position: Front
- Replaces: 89467-33080
- Part Name Code: 89467B
- Item Weight: 0.80 Pounds
- Item Dimensions: 14.4 x 12.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89467-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2008 Scion tC Oxygen Sensor, Rear
Part Number: 89465-21070
$96.57 MSRP: $135.55
You Save: $38.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear
- Position: Rear
- Part Name Code: 89465
- Item Weight: 2.70 Pounds
- Item Dimensions: 7.4 x 3.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89465-21070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2008 Scion tC Oxygen Sensor

Looking for affordable OEM 2008 Scion tC Oxygen Sensor? Explore our comprehensive catalogue of genuine 2008 Scion tC Oxygen Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion tC Parts Questions & Experts Answers

Q: How to install the Oxygen Sensor for Bank 1 Sensor 1 on 2008 Scion tC?
A: The installation of Air Fuel Ratio Sensor for Bank 1 Sensor 1 requires Special Service Tool: 09224-00010 to fasten the sensor onto the exhaust manifold at a recommended torque of 40 Nm (408 kgf-cm, 30 ft-lbf) when using the tool but the torque can be increased to 44 Nm (449 kgf-cm, 32 ft-lbf) without the tool. A torque wrench with a 30 cm (11.81 in.) fulcrum length is suggested. When installation is complete connect first the sensor connector and then the cable should go to the negative battery terminal. Initialization procedures are required since some systems need it when reconnecting or disconnecting the negative (-) battery terminal. Complete the installation procedure by verifying exhaust gas leakages.