Other Name: Belt Sub-Assembly, Seat; Seat Belt Lap and Shoulder Belt, Front Center; Center Belt Assembly; Seat Belt Assembly, Front Center, Passenger Side
Manufacturer Note: BLACK,TRIM2#
Position: Passenger Side
Part Name Code: 73160A
Item Weight: 2.90 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73301-0C040-C0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
Other Name: Belt Sub-Assembly, Seat; Seat Belt Lap and Shoulder Belt, Front Center; Center Belt Assembly; Seat Belt Assembly, Front Center, Passenger Side
Manufacturer Note: SAND BEIGE,TRIM4#
Position: Passenger Side
Part Name Code: 73160A
Item Weight: 2.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73301-0C040-E0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left, Rear Right; Outer Belt Assembly; Belt Assembly, Rear Seat, Outer
Manufacturer Note: GRAY,TRIM1#
Position: Outer
Item Weight: 2.60 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-0C070-B1
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
| Page 1 of 4 |Next >
1-20 of 67 Results
2007 Toyota Tundra Seat Belt
Looking for affordable OEM 2007 Toyota Tundra Seat Belt? Explore our comprehensive catalogue of genuine 2007 Toyota Tundra Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota Tundra Seat Belt Parts Q&A
Q: How to remove and install the Front Seat Belt Assembly for the Center Seat on 2007 Toyota Tundra?
A: The process to remove the Front Seat Outer Belt Assembly for the Center Seat starts by disassembling both the manual or power seat front assembly followed by the removal of the center front seat assembly. The procedure next requires workers to remove the Center Seat Cushion Shield from both left and right sides before unfastening the Center Front Seat Belt Assembly RH by taking out its bolt and seat belt anchor. The next step involves the removal of the Center Seatback Assembly together with the Front Seat Headrest Assembly and all components including Front Seat Shoulder Belt Cover as well as Upper Rear Seatback Lock Bezel, Lower Front Seat Shoulder Belt Cover, Reclining Remote Control Bezel, Front Seat Tray and Center Front Seat Armrest Cover. You need to uninstall the Seat Fastener Cover, Front Seatback Board Sub-Assembly, Front Seat Headrest Support before you detach the Center Front Seat Belt Assembly with nut and bolt removal followed by two claw eliminations. The first step of installation requires Center Front Seat Belt Assembly RH positioning through seat belt retractor holes with the seat frame claws while using a nut and bolt properly torqued to 10 N.m (102 kgf.cm, 7 ft.lbf) and 42 N.m (428 kgf.cm, 31 ft.lbf). The installation continues with the Front Seat Headrest Support, Front Seatback Board Sub-Assembly, Seat Fastener Cover, Front Seat Center Armrest Cover, Front Seat Tray, Reclining Remote Control Bezel, Lower Front Seat Shoulder Belt Cover, Upper Rear Seatback Lock Bezel, Front Seat Shoulder Belt Cover, and Front Seat Headrest Assembly. First install the belt anchor through the Center Front Seat Belt Assembly before torquing the bolt to 42 N.m (428 kgf.cm, 31 ft.lbf). Afterward, add the Center Seat Cushion Shield RH and LH before proceeding with the Center Front Seat Assembly and concluding with the Front Seat Assembly for all seats including power and manual controls.