My Garage
Cart

OEM 2007 Toyota RAV4 Alternator Bearing

Alternator Pulley Bearing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Alternator Bearing found

  • 2007 Toyota RAV4 Alternator Bearing Diagram - 90068-10142
    View related parts

    2007 Toyota RAV4 Bearing(For Alternator Drive End Frame)

    Part Number: 90068-10142
    $26.52 MSRP: $36.91
    You Save: $10.39 (29%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bearing, Ball; Alternator Bearing
    • Replaces: 90099-10110, 90099-10142
    • Part Name Code: 27310B
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 2.2 x 0.6 x 2.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 90068-10142
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2007 Toyota RAV4 Submodels:
    • Base, L, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS

2007 Toyota RAV4 Alternator Bearing

Looking for affordable OEM 2007 Toyota RAV4 Alternator Bearing? Explore our comprehensive catalogue of genuine 2007 Toyota RAV4 Alternator Bearing. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota RAV4 Alternator Bearing Parts Q&A

  • Q: How to replace the Alternator Bearing on 2007 Toyota RAV4?
    A: The generator drive end frame bearing replacement process starts by disconnecting the 4 retaining screws before removing the bearing retainer. The combination of hammer and Special Service Tools 09950-60010 (09951-00250) and 09950-70010 (09951-07100) helps tap the bearing free of its spot. The procedure requires the use of Special Service Tools 09950-60010 (09951-00250), 09950-70010 (09951-07100) together with a press for new bearing installation. You should install the bearing retainer with 4 screws and tighten them to 2.3 N.m (23 kgf.cm, 20 in.lbf).