OEM 2007 Toyota Prius Oil Filter

2007 Toyota Prius Parts Questions & Experts Answers

• Q: How to replace the oil and oil filter safely and effectively on 2007 Toyota Prius?

  A: Before changing the engine oil as well as the filter you need to take precautionary measures to prevent contact with used oil which dries out and creates skin irritation. You must wear protective gear and gloves during the task and thoroughly clean your exposed skin afterward. The replacement process requires users to drain oil into a container by removing the oil filler cap and the oil drain plug. Afterward the user must clean the drain plug and install it with a new gasket before torquing it to 38 N m (387 kgf cm, 28 ft. lbf). Start the procedure by using Special Service Tool: 09228-06501 to disassemble the oil filter sub-assembly. Install the new oil filter by first applying clean engine oil to the gasket then lightly screw it onto the seat until the gasket makes contact before tightening with Special Service Tool: 09228-06501 to reach 17.5 N m (178 kgf cm, 13 ft. lbf). When space permits. A fresh oil filler cap should go back after adding new engine oil while maintaining a correct oil level check. The proper spot exists for disposal of used oil and oil filters which serve environmental protection goals.