Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
2007 Toyota Highlander Wiper Blade
Looking for affordable OEM 2007 Toyota Highlander Wiper Blade? Explore our comprehensive catalogue of genuine 2007 Toyota Highlander Wiper Blade. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota Highlander Parts Questions & Experts Answers
Q: How to service the rear wiper blade assembly on 2007 Toyota Highlander?
A: To service the rear wiper blade assembly position it where the claw unmeshes while clicking and avoid damaging the claw. Users should pull the rear wiper blade assembly parallel to the left side of the vehicle while avoiding curved motions that could harm the windshield surface of the rear wiper arm. The insertion or removal process for rear wiper rubber requires pulling the rubber that extends from the blade stopper while you avoid strong force that could warp the backing plates or affect the blade claw; push the rubber ends toward the middle to make it simpler to remove. Placement of the rear wiper rubber requires fitting it onto the two wiper rubber backing plates while adjusting their orientation to the correct position. The rear wiper rubber should be fed through the rear end side claw from its middle location at the rear wiper blade until it protrudes beyond the rear end stopper before passing through the front tip side claw. Put back the rear wiper blade assembly as the last step.