How to service and repair the wiper switch on 2006 Toyota Sienna?

To service the wiper switch, take off the steering column cover, disconnect the connector, and with a screwdriver pop out the claw, and then pull out the switch assembly. Wrap the screwdriver tip using tape to prevent its damage. Installation To install, re-position steering column cover and replace switch assembly.

OEM 2006 Toyota Sienna Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Switch found

View related parts
2006 Toyota Sienna Wiper Switch, Rear
Part Number: 84652-08031
$239.28 MSRP: $341.63
You Save: $102.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Windshield Wiper; Windshield Wiper Switch, Rear; Windshield Washer Switch; Front Wiper Switch; Switch Assembly, Windshield Wiper (W/Relay, Wiper Control)
- Position: Rear
- Replaces: 84652-2G470
- Part Name Code: 84650D
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.3 x 4.8 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84652-08031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS

2006 Toyota Sienna Wiper Switch

Looking for affordable OEM 2006 Toyota Sienna Wiper Switch? Explore our comprehensive catalogue of genuine 2006 Toyota Sienna Wiper Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Sienna Wiper Switch Parts Q&A

Q: How to service and repair the wiper switch on 2006 Toyota Sienna?
A: To service the wiper switch, take off the steering column cover, disconnect the connector, and with a screwdriver pop out the claw, and then pull out the switch assembly. Wrap the screwdriver tip using tape to prevent its damage. Installation To install, re-position steering column cover and replace switch assembly.