OEM 2006 Toyota Land Cruiser Throttle Body

2006 Toyota Land Cruiser Parts Questions & Experts Answers

• Q: How to service and repair the throttle body on 2006 Toyota Land Cruiser?

  A: Service and repair operations on the throttle body start with disconnecting the negative cable which requires a waiting period of at least 90 seconds to stop Air Bag and seat belt pretensioner activation. The service begins with draining engine coolant and following by removal of the V-bank cover sub-assembly and intake air connector pipe. The service begins with throttle body removal after disconnecting the throttle position sensor and control connector as well as two water by-pass hoses followed by unfastening the three bolts and nut and throttle body and gasket removal. Before installation you must position the throttle body with its new gasket and use the three bolts and nut to fasten it in place by torquing to 14 N.m (142 kgf.cm, 10 ft.lbf). Afterward, attach the two water by-pass hoses and throttle position sensor and control connector. Install the intake air connector pipe along with the V-bank cover sub-assembly before restoring the cable connection to the negative battery terminal. Perform initialization procedures followed by engine coolant addition because some systems need it after cable reconnection. Also inspect for any engine coolant leakages.