How to replace the radiator assembly on 2006 Toyota Camry?

Engine coolant drain is required before disconnecting the radiator reserve tank hose or pipe together with the radiator hose inlet and outlet and oil cooler outlet hoses No.2 and No.3 (A/T). Start by removing the air cleaner inlet assembly by extracting its 2 bolts and progressing to the upper radiator support that requires disconnecting 2 horn connectors and removing the hood lock release lever cover and the bolt in the illustration and unfastening the 4 bolts securing the radiator support. To remove the radiator assembly start by disconnecting both the fan motor connector along with the ECT sensor connector before extracting the radiator from the body. The process begins by removing the fan assembly with motor and lower radiator support through the removal of 3 bolts which fasten the fan unit to the radiator. Installation requires fastening the fan assembly with motor to the radiator through the 3 bolts while applying a torque of 5.0 Nm (51 kgf-cm, 44 inch lbs.) and after that placing the radiator assembly into the body while reconnecting both the ECT sensor and fan motor connectors. The 4 upper radiator support bolts must be tightened to 14 Nm (142 kgf-cm, 10 ft. lbs.) while reattaching both horn connectors. The installation process ends with replacing the air cleaner inlet assembly through bolts set at 5.0 Nm (51 kgf-cm, 44 inch lbs.) then adjusting the hood sub-assembly, adding engine coolant and checking for coolant leaks.

OEM 2006 Toyota Camry Radiator

Cooling Radiator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Radiators found

View related parts
2006 Toyota Camry Radiator Assembly, L/Cap
Part Number: 16410-AZ044
$121.03 MSRP: $171.06
You Save: $50.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: RADIATOR ASSY, MVP; Radiator
- Item Weight: 12.60 Pounds
- Item Dimensions: 37.8 x 26.5 x 6.3 inches
- Condition: New
- SKU: 16410-AZ044
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2006 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
2006 Toyota Camry Radiator Assembly
Part Number: 16400-0H200
$256.30 MSRP: $365.94
You Save: $109.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator
- Manufacturer Note: MARK=0H200 OR 0H011
- Part Name Code: 16400
- Item Weight: 15.00 Pounds
- Item Dimensions: 35.7 x 6.2 x 25.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16400-0H200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2006 Toyota Camry Radiator Assembly
Part Number: 16400-20261
$386.25 MSRP: $566.05
You Save: $179.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator
- Part Name Code: 16400
- Item Weight: 14.30 Pounds
- Item Dimensions: 37.5 x 6.3 x 26.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16400-20261
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
2006 Toyota Camry Radiator Assembly
Part Number: 16400-0H131
$386.25 MSRP: $566.05
You Save: $179.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator
- Part Name Code: 16400
- Item Weight: 20.00 Pounds
- Item Dimensions: 38.2 x 6.3 x 27.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16400-0H131
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2006 Toyota Camry Radiator Assembly
Part Number: 16410-AZ014
$112.48 MSRP: $157.64
You Save: $45.16 (29%)
Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator
- Replaces: 16400-0H030, 16410-YZZAF
- Item Weight: 15.30 Pounds
- Item Dimensions: 37.1 x 27.3 x 5.1 inches
- Condition: New
- SKU: 16410-AZ014
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2006 Toyota Camry Radiator Assembly
Part Number: 16410-YZZAG
Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator
- Item Weight: 10.40 Pounds
- Item Dimensions: 35.4 x 6.4 x 26.3 inches
- Condition: New
- SKU: 16410-YZZAG
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2006 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2006 Toyota Camry Radiator Assembly
Part Number: 16410-YZZAE
Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator
- Item Weight: 14.70 Pounds
- Item Dimensions: 35.8 x 6.3 x 28.7 inches
- Condition: New
- SKU: 16410-YZZAE
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2006 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

2006 Toyota Camry Radiator

Looking for affordable OEM 2006 Toyota Camry Radiator? Explore our comprehensive catalogue of genuine 2006 Toyota Camry Radiator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Camry Parts Questions & Experts Answers

Q: How to replace the radiator assembly on 2006 Toyota Camry?
A: Engine coolant drain is required before disconnecting the radiator reserve tank hose or pipe together with the radiator hose inlet and outlet and oil cooler outlet hoses No.2 and No.3 (A/T). Start by removing the air cleaner inlet assembly by extracting its 2 bolts and progressing to the upper radiator support that requires disconnecting 2 horn connectors and removing the hood lock release lever cover and the bolt in the illustration and unfastening the 4 bolts securing the radiator support. To remove the radiator assembly start by disconnecting both the fan motor connector along with the ECT sensor connector before extracting the radiator from the body. The process begins by removing the fan assembly with motor and lower radiator support through the removal of 3 bolts which fasten the fan unit to the radiator. Installation requires fastening the fan assembly with motor to the radiator through the 3 bolts while applying a torque of 5.0 Nm (51 kgf-cm, 44 inch lbs.) and after that placing the radiator assembly into the body while reconnecting both the ECT sensor and fan motor connectors. The 4 upper radiator support bolts must be tightened to 14 Nm (142 kgf-cm, 10 ft. lbs.) while reattaching both horn connectors. The installation process ends with replacing the air cleaner inlet assembly through bolts set at 5.0 Nm (51 kgf-cm, 44 inch lbs.) then adjusting the hood sub-assembly, adding engine coolant and checking for coolant leaks.