How to service the rear wiper blade and rubber on 2006 Scion xA?

Service the rear wiper blade and rubber by first raising the blade until the claw detaches through the click sound and afterward extracting the wiper blade straight across toward the vehicle's left side while maintaining both the wiper blade and arm in an extended position. To remove the rear wiper rubber start by pulling from the end section extending from its blade stopper but avoid sharp pulling motions which might warp the backing plates or break the blade claw by pushing the rubber rubber from each end to the middle. To start installation you must place the 2 wiper rubber backing plates correctly onto the wiper rubber before proceeding. To install the wiper rubber in the middle of the blade begin at the claw position before inserting through the rear and front side claws so it extends past each blade stopper. When attaching the wiper blade to its position on the wiper you must ensure that it clicks correctly.

OEM 2006 Scion xA Wiper Blade

Windshield Wiper Blade

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wiper Blades found

View related parts
2006 Scion xA Wiper Blade, Driver Side
Part Number: 85222-0R040
$21.98 MSRP: $30.59
You Save: $8.61 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Front Wiper, Left-Hand; Windshield Wiper Blade, Left; Blade Assembly; Front Blade; Blade, Front Wiper, Driver Side
- Position: Driver Side
- Replaces: 85222-52100, 85222-42080, 85222-24080, 85222-33190
- Part Name Code: 85222A
- Item Weight: 0.90 Pounds
- Item Dimensions: 29.5 x 1.8 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85222-0R040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xA Wiper Blade Refill, Driver Side
Part Number: 85214-YZZFZ
$3.93 MSRP: $5.59
You Save: $1.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber, Wiper Blade; Windshield Wiper Blade Refill, Left; Windshield Wiper Blade Refills; Wiper Blade; Blade Assembly Refill; Insert
- Position: Driver Side
- Replaces: 85214-YZZF0
- Item Weight: 2.20 Pounds
- Condition: New
- SKU: 85214-YZZFZ
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xA Wiper Blade, Front Passenger Side
Part Number: 85212-13031
$21.98 MSRP: $30.59
You Save: $8.61 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Front Wiper, Right-Hand; Windshield Wiper Blade, Right; Windshield Wiper Blade, Left; Back Glass Wiper Blade; Rear Blade; Blade Assembly; Front Blade; Blade, Front Wiper, Passenger Side; Blade, Front Wiper, Driver Side
- Position: Front Passenger Side
- Replaces: 85212-13030, 85212-44030
- Item Weight: 1.40 Pounds
- Item Dimensions: 22.0 x 1.9 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85212-13031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xA Wiper Blade, Rear
Part Number: 85242-52040
$16.12 MSRP: $22.44
You Save: $6.32 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Rear Wiper; Back Glass Wiper Blade; Rear Blade; Blade Assembly, Rear Wiper
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 14.9 x 1.9 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85242-52040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xA Wiper Blade Refill, Rubber
Part Number: 85214-50061
$7.77 MSRP: $10.81
You Save: $3.04 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber, Wiper Insert; Windshield Wiper Blade Refill Set, Rear, Right, Left; Blade Assembly Refill; Wiper Blades for Passenger, Driver, and Rear.
- Replaces: 85214-50060
- Item Weight: 0.40 Pounds
- Material: Rubber
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85214-50061
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xA Wiper Blade Refill, Rubber
Part Number: 85214-31010
$7.77 MSRP: $10.81
You Save: $3.04 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber, Wiper Insert; Wiper Blade; Wiper Blade Insert; Rubber, Rear Wiper
- Part Name Code: 85214R
- Item Weight: 0.40 Pounds
- Material: Rubber
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85214-31010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS

2006 Scion xA Wiper Blade

Looking for affordable OEM 2006 Scion xA Wiper Blade? Explore our comprehensive catalogue of genuine 2006 Scion xA Wiper Blade. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Scion xA Parts Questions & Experts Answers

Q: How to service the rear wiper blade and rubber on 2006 Scion xA?
A: Service the rear wiper blade and rubber by first raising the blade until the claw detaches through the click sound and afterward extracting the wiper blade straight across toward the vehicle's left side while maintaining both the wiper blade and arm in an extended position. To remove the rear wiper rubber start by pulling from the end section extending from its blade stopper but avoid sharp pulling motions which might warp the backing plates or break the blade claw by pushing the rubber rubber from each end to the middle. To start installation you must place the 2 wiper rubber backing plates correctly onto the wiper rubber before proceeding. To install the wiper rubber in the middle of the blade begin at the claw position before inserting through the rear and front side claws so it extends past each blade stopper. When attaching the wiper blade to its position on the wiper you must ensure that it clicks correctly.