How to service and repair the Drive Shaft assembly on 2005 Toyota Sequoia?

The service and repair process for 2WD propeller shaft assembly requires you to start by marking differential and propeller shaft flanges then to remove all 4 nuts and washers. Use tool number 09325-40010 as a Special Service Tool at the transmission opening to stop oil leaks then place the propeller shaft yoke outside the transmission. Avoid tightly gripping the propeller shaft tube in the vise since it can cause deformation. Each shaft must receive runout examination using a dial indicator until the results stay below 0.8 mm (0.031 inch) maximum runout value. A new shaft must be obtained if the shaft shows runout beyond this threshold. You should inspect the spider bearing for damage along with wear but also check axial play through yoke turning while firmly holding the shaft to ensure it remains within a maximum bearing axial play of 0.05 mm (0.0020 inch). Replace the spider bearing if the criteria is exceeded.

OEM 2005 Toyota Sequoia Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Drive Shafts found

View related parts
2005 Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-34120
$533.78 MSRP: $782.25
You Save: $248.47 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Rear
- Position: Rear
- Part Name Code: 37110F
- Item Weight: 30.00 Pounds
- Item Dimensions: 60.9 x 4.0 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37110-34120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-0C040
$524.93 MSRP: $769.29
You Save: $244.36 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Rear
- Position: Rear
- Part Name Code: 37110F
- Item Weight: 23.90 Pounds
- Item Dimensions: 96.3 x 10.4 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37110-0C040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Drive Shaft, Front
Part Number: 37140-0C051
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Front
- Position: Front
- Replaces: 37140-0C050
- Part Name Code: 37140
- Item Weight: 15.40 Pounds
- Item Dimensions: 34.7 x 6.9 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37140-0C051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2005 Toyota Sequoia Drive Shaft

Looking for affordable OEM 2005 Toyota Sequoia Drive Shaft? Explore our comprehensive catalogue of genuine 2005 Toyota Sequoia Drive Shaft. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service and repair the Drive Shaft assembly on 2005 Toyota Sequoia?
A: The service and repair process for 2WD propeller shaft assembly requires you to start by marking differential and propeller shaft flanges then to remove all 4 nuts and washers. Use tool number 09325-40010 as a Special Service Tool at the transmission opening to stop oil leaks then place the propeller shaft yoke outside the transmission. Avoid tightly gripping the propeller shaft tube in the vise since it can cause deformation. Each shaft must receive runout examination using a dial indicator until the results stay below 0.8 mm (0.031 inch) maximum runout value. A new shaft must be obtained if the shaft shows runout beyond this threshold. You should inspect the spider bearing for damage along with wear but also check axial play through yoke turning while firmly holding the shaft to ensure it remains within a maximum bearing axial play of 0.05 mm (0.0020 inch). Replace the spider bearing if the criteria is exceeded.