Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Front Right; Cylinder Assembly, Front Disc Brake, Passenger Side; Brake Caliper
Position: Passenger Side
Part Name Code: 47730
Item Weight: 12.00 Pounds
Item Dimensions: 10.3 x 7.5 x 5.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 47730-52020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Echo Submodels:
Base | 4 Cyl 1.5 L GAS
2005 Toyota Echo Brake Caliper
Looking for affordable OEM 2005 Toyota Echo Brake Caliper? Explore our comprehensive catalogue of genuine 2005 Toyota Echo Brake Caliper. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota Echo Parts Questions & Experts Answers
Q: How to service and repair the brake caliper on 2005 Toyota Echo?
A: Service and repair procedures for brake calipers start with removing the front wheel before fastening the disc with hub nuts at 103 Nm torque (1,050 kgf-cm, 76 ft.lbs.). The brake caliper assembly requires removal of the flexible hose union bolt as well as its gasket to ensure proper 30 Nm torque (310 kgf-cm, 22 ft. lbs.). A container should be used to capture any leaking brake fluid; installation requires secure placement of the flexible hose in the caliper lock hole. The removal process begins with holding the sliding pin while loosening the 2 installation bolts until torqued to 34 Nm (350 kgf-cm, 25 ft. lbs.). Then detach the caliper from the torque plate before discarding the 2 dust boots from the torque plate. Remove brake pads with anti-squeal shims as well as their associated 2 pad support plates. The complete installation procedure will reverse removal steps starting with brake fluid insertion into the reservoir then bleeding the brake system followed by leak detection.