OEM 2005 Toyota Echo ABS Control Module

2005 Toyota Echo Parts Questions & Experts Answers

• Q: How to service the ABS Control Module for Antilock Brakes on 2005 Toyota Echo?

  A: Service of the Antilock Brake Hydraulic Control Assembly begins by disconnecting the ABS actuator assembly connector along with removing the battery unit. The next step requires you to remove and set aside the nuts of engine room relay block No. 2. The 6 brake lines connected to the ABS actuator assembly require Special Service Tool: 09023-00100 to properly detach them at 15 Nm (155 kgf-cm, 11 ft. lbs.). Fasten the 19 Nm torque on the 3 bolts and then remove the ABS actuator assembly. The first step for the ABS actuator includes removing its three secured nuts which detach the actuator bracket at 4.7 Nm (48 kgf-cm, 42 inch lbs.) torque while removing the subsequent three holders from the ABS actuator. End the ABS actuator bolt and clamp removal by tightening both components to 19 Nm (195 kgf-cm, 14 ft. lbs.). For installation follow the removal process in reverse order while post-installation requires brake fluid addition to the reservoir and brake system bleeding followed by leak verification.