How to Service and Repair the ABS Control Module on 2004 Toyota Tundra?

The procedure for Hydraulic Control Assembly for Antilock Brakes service starts with brake line cover removal followed by disconnecting the connector by extracting the release bar. First use Special Service Tool: 09023-00100 to disconnect the 5 brake lines from the ABS actuator by tightening them to 15 Nm (155 kgf-cm, 11 ft. lbs.). The service begins with applying 19 Nm (195 kgf-cm, 14 ft. lbs.) torque to remove 3 nuts from the ABS actuator assembly before extracting the actuator by taking out the 3 nuts with 8.0 Nm (82 kgf-cm, 71 inch lbs.) torque and finally separating the 3 holders and 3 cushions. To begin disassembly the ABS actuator requires removing its clamp and screw with 2.9 Nm torque (30 kgf-cm, 26 inch lbs.) before you can separate the connector. A 4 mm hexagon wrench should be used to detach the 4 bolts maintaining the ABS ECU while tightening them to 4.4 Nm (45 kgf-cm, 39 inch lbs.). Protective measures must be taken for the actuator to avoid sealing surface contamination while soft objects or plastic tools should be used for cleaning with no chemical cleaners when required. The procedure for rebuilding and system installation requires performing steps in a reverse order from what was used in disassembling and eliminating parts. British Standard metric hex spanner with 4 mm tool size helps secure the ABS ECU bolts with 4.4 Nm (45 kgf-cm, 39 inch lbs) torque capacity. Post-installation requires brake fluid injection into the reservoir followed by brake system bleeding process while inspecting for fluid leaks.

OEM 2004 Toyota Tundra ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 ABS Control Modules found

View related parts
2004 Toyota Tundra Modulator Valve
Part Number: 44050-0C081
$1359.09 MSRP: $1710.83
You Save: $351.74 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Replaces: 44050-0C080
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.3 x 7.8 x 6.0 inches
- Condition: New
- SKU: 44050-0C081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2004 Toyota Tundra Control Module
Part Number: 89540-34080
$2308.86 MSRP: $3383.66
You Save: $1074.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer, Skid Control
- Manufacturer Note: W(VSC)
- Part Name Code: 89541
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.2 x 7.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-34080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Tundra Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2004 Toyota Tundra Modulator Valve
Part Number: 44050-0C091
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.3 x 7.8 x 6.3 inches
- Condition: New
- SKU: 44050-0C091
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2004 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2004 Toyota Tundra Control Module
Part Number: 89540-34100
$2308.86 MSRP: $3383.66
You Save: $1074.80 (32%)
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer, Skid Control
- Manufacturer Note: W(VSC)
- Part Name Code: 89541
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.5 x 7.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-34100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Tundra Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2004 Toyota Tundra Control Module
Part Number: 89540-34050
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer, Skid Control
- Manufacturer Note: W(VSC)
- Part Name Code: 89541
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.6 x 7.5 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-34050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Tundra Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2004 Toyota Tundra Control Module
Part Number: 89540-34060
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer, Skid Control
- Manufacturer Note: W(VSC)
- Part Name Code: 89541
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.3 x 7.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-34060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Tundra Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2004 Toyota Tundra Control Module
Part Number: 89540-34090
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Manufacturer Note: W(VSC)
- Part Name Code: 89541
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.2 x 7.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-34090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Tundra Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2004 Toyota Tundra Control Module
Part Number: 89540-34070
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Manufacturer Note: W(VSC)
- Part Name Code: 89541
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.3 x 7.5 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-34070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Tundra Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2004 Toyota Tundra ABS Control Module

Looking for affordable OEM 2004 Toyota Tundra ABS Control Module? Explore our comprehensive catalogue of genuine 2004 Toyota Tundra ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Tundra Parts Questions & Experts Answers

Q: How to Service and Repair the ABS Control Module on 2004 Toyota Tundra?
A: The procedure for Hydraulic Control Assembly for Antilock Brakes service starts with brake line cover removal followed by disconnecting the connector by extracting the release bar. First use Special Service Tool: 09023-00100 to disconnect the 5 brake lines from the ABS actuator by tightening them to 15 Nm (155 kgf-cm, 11 ft. lbs.). The service begins with applying 19 Nm (195 kgf-cm, 14 ft. lbs.) torque to remove 3 nuts from the ABS actuator assembly before extracting the actuator by taking out the 3 nuts with 8.0 Nm (82 kgf-cm, 71 inch lbs.) torque and finally separating the 3 holders and 3 cushions. To begin disassembly the ABS actuator requires removing its clamp and screw with 2.9 Nm torque (30 kgf-cm, 26 inch lbs.) before you can separate the connector. A 4 mm hexagon wrench should be used to detach the 4 bolts maintaining the ABS ECU while tightening them to 4.4 Nm (45 kgf-cm, 39 inch lbs.). Protective measures must be taken for the actuator to avoid sealing surface contamination while soft objects or plastic tools should be used for cleaning with no chemical cleaners when required. The procedure for rebuilding and system installation requires performing steps in a reverse order from what was used in disassembling and eliminating parts. British Standard metric hex spanner with 4 mm tool size helps secure the ABS ECU bolts with 4.4 Nm (45 kgf-cm, 39 inch lbs) torque capacity. Post-installation requires brake fluid injection into the reservoir followed by brake system bleeding process while inspecting for fluid leaks.

Related 2004 Toyota Tundra Parts

Alternate Year Models

2003 Toyota Tundra ABS Control Module 2005 Toyota Tundra ABS Control Module