Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2004 Toyota Prius Submodels:
Base | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
2004 Toyota Prius Car Speakers
Looking for affordable OEM 2004 Toyota Prius Car Speakers? Explore our comprehensive catalogue of genuine 2004 Toyota Prius Car Speakers. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2004 Toyota Prius Parts Questions & Experts Answers
Q: How to replace the Front No.1 Car Speakers Assy on 2004 Toyota Prius?
A: The replacement process of the Front No.1 Speaker Assy requires initial removal of Front Door Inside Handle Bezel LH followed by Front Door Lower Frame Bracket Garnish LH, Door Pull Handle, Front Armrest Base Panel Upper LH, Front Door Glass Weather Strip Inner LH and Front Door Trim Board Sub-Assy LH. First disconnect the connector from the Front No.1 Speaker Assy and use a drill with a bit smaller than 4 mm (0.16 in.) to remove the 3 rivets from the front door panel. Drill the rivets along their head circumference to break the rivet flange. Work carefully because the cut rivet will reach high temperatures before proceeding to remove any drill shreds from the cut area. A vacuum cleaner should be used to clean up the ripped rivet and extraneous materials present on the front door panel. When installing new strike rivets onto the Front No.1 Speaker Assy users must employ either an air riveter or hand riveter for three rivets on the front door panel following the correct sequence in the illustration. The installation requires both the rivet head and riveter body to be kept straight to prevent damage or warps in the materials and to maintain proper material contact. Finally, reconnect the connector.