Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left; Outer Belt Assembly; Belt Assembly, Rear Seat 3 Point Type, Outer Driver Side
Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Belt Assembly, Front Seat Outer, Passenger Side
Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Belt Assembly, Front Seat Outer, Passenger Side
Position: Passenger Side
Part Name Code: 73210
Item Weight: 4.20 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73210-0C021-B2
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2003 Toyota Tundra Submodels:
Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Right; Outer Belt Assembly; Belt Assembly, Rear Seat 3 Point Type, Outer Passenger Side
Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Belt Assembly, Front Seat Outer, Passenger Side
Manufacturer Note: OAK,TRIM4#
Position: Passenger Side
Replaces: 73210-0C021-B4
Part Name Code: 73210
Item Weight: 3.90 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73210-0C021-E2
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2003 Toyota Tundra Submodels:
Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2003 Toyota Tundra Submodels:
Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
2003 Toyota Tundra Seat Belt
Looking for affordable OEM 2003 Toyota Tundra Seat Belt? Explore our comprehensive catalogue of genuine 2003 Toyota Tundra Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2003 Toyota Tundra Parts Questions & Experts Answers
Q: What steps should be taken to inspect and repair the seat belt system after a collision on 2003 Toyota Tundra?
A: Vehicle occupants need to inspect and fix the seat belt system following any crash encounter. Remove and replace every component of the belt system beginning with outer and inner belt parts as well as bolts and nuts or sill-bar when severe impacts happened even if no initial damage shows. Start by examining pretensioner activation then execute diagnostic testing followed by visual checks on the front seat outer belt that is removed. The quarter trim and quarter panel of a standard cab should be inspected for cuts as well as cracks and marked discoloration while looking for panel deformities. When checking an access cab front door it is essential to assess the rear scuff plate for signs of damage while also inspecting the ELR bracket for deformation. Look for wire harness cutting and connector chipping as well as belt detection in the front chair outer section. Perform another diagnostic check together with visual inspection of the same inspection areas after verification of pretensioner activation. The seat belt pretensioner requires replacement when it activates but also when discovered faulty during troubleshooting or if the front seat outer belt fails. Replacement is necessary when the front seat outer belt has been removed. Both the front seat outer belt installation and seat belt pretensioner replacement must follow the established correct procedures. Special Service Tool: 12345.