×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2003 Toyota Tacoma A/C Accumulator
Accumulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Accumulator found
2003 Toyota Tacoma Tank, Receiver Air Conditioner
Part Number: 88471-20050$56.39 MSRP: $78.49You Save: $22.10 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Tank, Receiver; Drier Desiccant Element; A/C Receiver Drier
- Replaces: 88471-04020, 88471-06020
- Part Name Code: 88471
- Item Weight: 1.40 Pounds
- Item Dimensions: 8.9 x 3.3 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88471-20050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2003 Toyota Tacoma A/C Accumulator
Looking for affordable OEM 2003 Toyota Tacoma A/C Accumulator? Explore our comprehensive catalogue of genuine 2003 Toyota Tacoma A/C Accumulator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2003 Toyota Tacoma A/C Accumulator Parts Q&A
- Q: How to service and repair the A/C Accumulator on 2003 Toyota Tacoma?A: Before servicing the A/C accumulator technicians must begin with refrigerant discharge from the system then evacuate the air while charging it with 600 + 50 g (21.16 + 1.76 oz.) refrigerant followed by leak inspection. Disconnection of the liquid tube between the A/C accumulator and cooling unit should begin by removing its bolt while ensuring it reaches 6.0 N.m (60 kgf.cm, 52 in.lbf) torque level then sealing the open fittings with caps to avoid contamination from moisture or dirt. The procedure begins by uninstalling the liquid tube between A/C accumulator and condenser through nut loosening at 14 N.m (140 kgf.cm, 10 ft.lbf) to disconnect it before removing both tubes at 6.0 N.m (60 kgf.cm, 52 in.lbf). The open fittings must be capped during this process. Three new O-rings must receive compressor oil lubrication before their installation process. To continue the process you must detach the A/C accumulator from its holder through bolt removal and lifting it upward. When replacing the A/C accumulator it requires 20 cc (0.71 fl.oz.) of ND-OIL 8 or equivalent compressor oil to be added inside. The set up process follows the exact opposite sequence of the disassembly procedures.