How to replace the ignition coil on 2003 Toyota Sienna?

The first step is to remove the V-bank cover which requires a 5 mm hexagon wrench to take off the 3 cap nuts while counterclockwise operation on the V-bank cover fastener allows the cover to be removed. The maintenance process begins by disconnecting the 6 ignition coil connectors then removing the bolt before extracting all 6 ignition coils. The new ignition coil gets connected to the spark plug to the cylinder head cover followed by bolt installation at 8.0 N.m (80 kgf.cm, 69 in.lbf) before the 6 ignition coil connector installation. Apply the 5 mm hexagon wrench to install three cap nuts on the V-bank cover while pressing down the V-bank cover fastener.

OEM 2003 Toyota Sienna Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2003 Toyota Sienna Coil Assembly, Ignition
Part Number: 90919-02234
$116.47 MSRP: $163.50
You Save: $47.03 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Ignition Coil
- Manufacturer Note: (J)
- Replaces: 90080-19016
- Part Name Code: 19500
- Item Weight: 1.00 Pounds
- Item Dimensions: 13.2 x 11.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 90919-02234
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Sienna Submodels:
- CE, LE, XLE | 6 Cyl 3.0 L GAS

2003 Toyota Sienna Ignition Coil

Looking for affordable OEM 2003 Toyota Sienna Ignition Coil? Explore our comprehensive catalogue of genuine 2003 Toyota Sienna Ignition Coil. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Sienna Parts Questions & Experts Answers

Q: How to replace the ignition coil on 2003 Toyota Sienna?
A: The first step is to remove the V-bank cover which requires a 5 mm hexagon wrench to take off the 3 cap nuts while counterclockwise operation on the V-bank cover fastener allows the cover to be removed. The maintenance process begins by disconnecting the 6 ignition coil connectors then removing the bolt before extracting all 6 ignition coils. The new ignition coil gets connected to the spark plug to the cylinder head cover followed by bolt installation at 8.0 N.m (80 kgf.cm, 69 in.lbf) before the 6 ignition coil connector installation. Apply the 5 mm hexagon wrench to install three cap nuts on the V-bank cover while pressing down the V-bank cover fastener.