My Garage
Cart

OEM 2003 Toyota Sequoia Throttle Body

Fuel Injection Throttle Body
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Body found

  • 2003 Toyota Sequoia Throttle Body - 22030-50170
    2003 Toyota Sequoia Throttle Body Diagram - 22030-50170
    View related parts

    2003 Toyota Sequoia Throttle Body

    Part Number: 22030-50170
    $356.04 MSRP: $521.77
    You Save: $165.73 (32%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Body Assembly, Throttle; Fuel Injection Throttle Body Assembly; Fuel Injection ETB Assembly; Body Assembly, Throttle W/Throttle Position Sensor
    • Part Name Code: 22030
    • Item Weight: 3.90 Pounds
    • Item Dimensions: 9.5 x 7.9 x 6.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 22030-50170
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2003 Toyota Sequoia Submodels:
    • Limited, SR5 | 8 Cyl 4.7 L GAS

2003 Toyota Sequoia Throttle Body

Looking for affordable OEM 2003 Toyota Sequoia Throttle Body? Explore our comprehensive catalogue of genuine 2003 Toyota Sequoia Throttle Body. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Sequoia Parts Questions & Experts Answers

  • Q: How to service and repair the throttle body on 2003 Toyota Sequoia?
    A: Service and repair of the throttle body requires starting with the removal of the throttle body cover followed by draining engine coolant and disconnecting the intake air connector. You should begin by deleting the throttle body after detaching each component including the throttle control connector together with the PCV hose and water bypass hose. Start by removing two bolts and two nuts to separate the throttle body from the intake manifold and proceed with unplugging the water bypass hose from the manifold thermostat at the throttle body before removing the throttle body and gasket. Attach the water bypass hose to the manifold thermostat positioned on the throttle body and place a new gasket before tightening the 2 bolts and 2 nuts to 18 N.m (185 kgf.cm, 13 ft.lbf). Reconnect both hoses to the throttle body then connect the throttle control connector while reinstalling the intake air connector and filling the system with engine coolant followed by engine start-up before checking all engine coolant leaks and lastly placing the throttle body cover into position.

Related 2003 Toyota Sequoia Parts