OEM 2003 Toyota RAV4 Air Bag

2003 Toyota RAV4 Parts Questions & Experts Answers

• Q: How should the Air Bag system be inspected after a collision on 2003 Toyota RAV4?

  A: It becomes necessary to inspect supplemental restraints immediately after a collision by beginning with front passenger Air Bag assembly evaluation. A diagnostic system check and visual inspection must be performed on front passenger Air Bag assemblies of vehicles which did not experience collisions to identify any existing cuts or minute cracks or marked discoloration. A thorough check of the diagnostic system must start before inspecting the front passenger Air Bag assembly after removal following a collision with a deployed Air Bag. This inspection should focus on similar damage to the assembly as well as wire harness cuts and cracks and instrument panel deformation or cracks. The instrument panel alongside reinforcement components should receive complete replacement in case of damage rather than attempting any repair work. The diagnostic and visual checks for vehicles with deployed Air Bags should be followed while inspecting both the connector and wire harness for possible damage. The steering wheel pad together with the spiral cable requires inspection to verify they remain free from damage and do not experience interferences after installation. Inspection of the SRS wire harness will check its breakage status in addition to ensuring connector integrity since it operates as part of the instrument panel wire harness assembly. Every defective element within the SRS wire harness needs immediate replacement while a complete assembly change is necessary if the wire harness sustains damage. Replacement of the Air Bag sensor assembly becomes necessary when it deploys or shows defects or after falling from its position. The front Air Bag sensor requires diagnostic testing and an inspection for external damage to brackets along with connector connections to determine possible replacement needs. Any visual signs of damage or prior deployment require replacing the sensor. Use proper removal and installation procedures when working with these components because safety matters together with compliance requirements.