How to replace the windshield wiper switch on 2003 Toyota Highlander?

In order to replace the windshield wiper switch, take off the lower and upper steering column covers. Take the connector off the switch assembly. With a screwdriver, press the claw to release it and take it out, without overstraining the claw; it is best to tape the screwdriver tip.

OEM 2003 Toyota Highlander Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Switch found

View related parts
2003 Toyota Highlander Wiper Switch, Rear
Part Number: 84652-08031
$239.28 MSRP: $341.63
You Save: $102.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Windshield Wiper; Windshield Wiper Switch, Rear; Windshield Washer Switch; Front Wiper Switch; Switch Assembly, Windshield Wiper (W/Relay, Wiper Control)
- Position: Rear
- Replaces: 84652-2G470
- Part Name Code: 84650D
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.3 x 4.8 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84652-08031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Highlander Submodels:
- Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

2003 Toyota Highlander Wiper Switch

Looking for affordable OEM 2003 Toyota Highlander Wiper Switch? Explore our comprehensive catalogue of genuine 2003 Toyota Highlander Wiper Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Highlander Wiper Switch Parts Q&A

Q: How to replace the windshield wiper switch on 2003 Toyota Highlander?
A: In order to replace the windshield wiper switch, take off the lower and upper steering column covers. Take the connector off the switch assembly. With a screwdriver, press the claw to release it and take it out, without overstraining the claw; it is best to tape the screwdriver tip.