How to service and repair the blower motor on 2003 Toyota Highlander?

To service and repair the blower motor, remove the glove compartment door assembly and air ducts. Separate the ECM and remove the air filter sub-assembly. Disconnect the blower assembly and recirculation damper servo. Install the blower assembly, securing it properly, and reinstall the ECM.

OEM 2003 Toyota Highlander Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2003 Toyota Highlander Blower Motor, Front
Part Number: 87103-48020
$185.11 MSRP: $264.29
You Save: $79.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Sub-Assembly, Blower; HVAC Blower Motor, Front; Blower Assembly; Motor Sub-Assembly, Cooling Unit, W/Fan; HVAC Blower Motor
- Position: Front
- Part Name Code: 87103A
- Item Weight: 4.20 Pounds
- Item Dimensions: 10.4 x 10.4 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87103-48020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS

2003 Toyota Highlander Blower Motor

Looking for affordable OEM 2003 Toyota Highlander Blower Motor? Explore our comprehensive catalogue of genuine 2003 Toyota Highlander Blower Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Highlander Blower Motor Parts Q&A

Q: How to service and repair the blower motor on 2003 Toyota Highlander?
A: To service and repair the blower motor, remove the glove compartment door assembly and air ducts. Separate the ECM and remove the air filter sub-assembly. Disconnect the blower assembly and recirculation damper servo. Install the blower assembly, securing it properly, and reinstall the ECM.