How to replace the thermostat on 2003 Toyota Camry?

Draining coolants is the first step before removing the water inlet through the process of taking off two nuts and disconnecting it from the cylinder block. The replacement of the thermostat starts with adding a new gasket to it before putting the thermostat into position with the jiggle valve pointing upward within a 10 degrees range around the manufacturer's recommendation. Use two nuts to reinstall the water inlet before tightening them to 9 Nm (92 kgf-cm, 80 inch lbs.). Finish the process by adding cooling agent before checking for possible engine coolant leaks.

OEM 2003 Toyota Camry Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

View related parts
2003 Toyota Camry Water Inlet
Part Number: 90916-A3003
$22.69 MSRP: $31.59
You Save: $8.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Thermostat; Engine Coolant Thermostat; Thermostat, Coolant
- Replaces: 90916-03129, 90916-03084
- Part Name Code: 16331A
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.3 x 0.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-A3003
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- Base, CE, DX, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

2003 Toyota Camry Thermostat

Looking for affordable OEM 2003 Toyota Camry Thermostat? Explore our comprehensive catalogue of genuine 2003 Toyota Camry Thermostat. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Camry Parts Questions & Experts Answers

Q: How to replace the thermostat on 2003 Toyota Camry?
A: Draining coolants is the first step before removing the water inlet through the process of taking off two nuts and disconnecting it from the cylinder block. The replacement of the thermostat starts with adding a new gasket to it before putting the thermostat into position with the jiggle valve pointing upward within a 10 degrees range around the manufacturer's recommendation. Use two nuts to reinstall the water inlet before tightening them to 9 Nm (92 kgf-cm, 80 inch lbs.). Finish the process by adding cooling agent before checking for possible engine coolant leaks.