Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left Outer, Rear Right Outer; Belt & Retractor; Rear Seat 3 Point Type, Outer Passenger & Driver Side Assemblies
Manufacturer Note: SHADOW GRAY,TRIM9#
Position: Rear
Replaces: 73360-47030-B0
Item Weight: 3.30 Pounds
Item Dimensions: 11.9 x 11.0 x 8.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-47031-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Belt Assembly, Rear Seat I; Seat Belt Lap and Shoulder Belt, Rear Center; Belt & Retractor; Belt Assembly, Rear Seat Inner W/Center, Driver Side
Manufacturer Note: SHADOW GRAY,TRIM9#
Position: Driver Side
Part Name Code: 73480
Item Weight: 2.40 Pounds
Item Dimensions: 13.8 x 10.6 x 5.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73480-47020-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Right; Latch; Belt Assembly, Front Seat Inner, Passenger Side
Manufacturer Note: W(*80,DRIVER SIDE & PASSENGER SIDE),AMETHYST,TRIM9#
Position: Passenger Side
Part Name Code: 73230
Item Weight: 1.50 Pounds
Item Dimensions: 13.8 x 11.2 x 2.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73230-47040-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2001 Toyota Prius Submodels:
Base | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
2001 Toyota Prius Seat Belt
Looking for affordable OEM 2001 Toyota Prius Seat Belt? Explore our comprehensive catalogue of genuine 2001 Toyota Prius Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2001 Toyota Prius Seat Belt Parts Q&A
Q: Why is it crucial to inspect and repair the seat belt system after a collision on 2001 Toyota Prius?
A: It is essential to inspect and repair the seat belt system because all assembly components including the outer belt and inner belt with their respective bolts and nuts and sill-bar need replacement if severe impact usage is detected independent of visible damage. To start the assessment you should determine whether the pretensioner engaged then perform diagnostic tests followed by a visual check of the outer front seat belt when it is removed from the vehicle. Check the center pillar lower garnish and wire harness and connector for cuts, cracks and discoloration before evaluating the center pillar and front seat outer belt for deformation. Rephrase the diagnostic code test after activating the pretensioner device while you inspect the whole system for center pillar distortions along with any connector as well as wire harness damage. The seat belt pretensioner must get replaced in cases where it has activated or shown faulty during testing or if the front seat outer belt needs replacement according to the Special Service Tool results or if the front seat belt drops from the vehicle. The correct installation and removal procedures must be used when working with front seat outer belts and seat pretensioners.