Toyota 73210-47030-B0
Lap & Shoulder Belt, Passenger Side

It is essential to inspect and repair the seat belt system because all assembly components including the outer belt and inner belt with their respective bolts and nuts and sill-bar need replacement if severe impact usage is detected independent of visible damage. To start the assessment you should determine whether the pretensioner engaged then perform diagnostic tests followed by a visual check of the outer front seat belt when it is removed from the vehicle. Check the center pillar lower garnish and wire harness and connector for cuts, cracks and discoloration before evaluating the center pillar and front seat outer belt for deformation. Rephrase the diagnostic code test after activating the pretensioner device while you inspect the whole system for center pillar distortions along with any connector as well as wire harness damage. The seat belt pretensioner must get replaced in cases where it has activated or shown faulty during testing or if the front seat outer belt needs replacement according to the Special Service Tool results or if the front seat belt drops from the vehicle. The correct installation and removal procedures must be used when working with front seat outer belts and seat pretensioners.

It must be replaced if it has been activated, found faulty during troubleshooting, if the front seat outer belt is faulty, or if the front seat outer belt has been dropped.