My Garage
Cart

OEM 2001 Toyota Echo Steering Wheel

Navigation Steering Wheel
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Steering Wheels found

  • 2001 Toyota Echo Steering Wheel - 45100-52010-B2
    2001 Toyota Echo Steering Wheel Diagram - 45100-52010-B2
    View related parts

    2001 Toyota Echo Steering Wheel

    Part Number: 45100-52010-B2
    $328.43 MSRP: $468.91
    You Save: $140.48 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Wheel Assembly, Steering
    • Item Weight: 3.80 Pounds
    • Condition: New
    • SKU: 45100-52010-B2
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    Fits the following 2001 Toyota Echo Submodels:
    • Base | 4 Cyl 1.5 L GAS
  • 2001 Toyota Echo Steering Wheel - 45100-52010-B3
    2001 Toyota Echo Steering Wheel Diagram - 45100-52010-B3
    View related parts

    2001 Toyota Echo Steering Wheel, Medium Gray

    Part Number: 45100-52010-B3
    $303.70 MSRP: $433.62
    You Save: $129.92 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Wheel Assembly, Steering
    • Replaces: 45100-52010-B0
    • Condition: New
    • SKU: 45100-52010-B3
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    Fits the following 2001 Toyota Echo Submodels:
    • Base | 4 Cyl 1.5 L GAS
  • 2001 Toyota Echo Steering Wheel - 45100-52010-B1
    2001 Toyota Echo Steering Wheel Diagram - 45100-52010-B1
    View related parts

    2001 Toyota Echo Steering Wheel

    Part Number: 45100-52010-B1
    $327.33 MSRP: $467.36
    You Save: $140.03 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Wheel Assembly, Steering
    • Manufacturer Note: 3-SPOKE,URETHANE,LT.AMETHYST,TRIM9#
    • Part Name Code: 45100
    • Item Weight: 5.20 Pounds
    • Item Dimensions: 17.2 x 16.1 x 7.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 45100-52010-B1
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2001 Toyota Echo Submodels:
    • Base | 4 Cyl 1.5 L GAS

2001 Toyota Echo Steering Wheel

Looking for affordable OEM 2001 Toyota Echo Steering Wheel? Explore our comprehensive catalogue of genuine 2001 Toyota Echo Steering Wheel. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Echo Steering Wheel Parts Q&A

  • Q: How to address a steering wheel that is off center on 2001 Toyota Echo?
    A: The first step to correct steering wheel misalignment involves putting masking tape at the top center points of both steering wheel and steering column upper cover. The driver should travel 100-meters forward in a straight path at 35 mph (56 km/h) before steering using the wheel. Place masking tape and draw a line after positioning the steering wheel straight ahead by using the upper surfaces of the wheel and spoke together with the SRS Air Bag reference. Use the masking tape to draw a new line then measure the screen distance that equals to 1 degrees by converting each 1 mm (0.04 inch) measurement to this angle. To perform adjustments first place identification marks on visible points of the RH and LH tie rod ends and rack ends. Then measure screw-to-end distances while recording these measurements. A technician should remove both rack boots' RH and LH clips before loosening their lock nuts and moving the rack ends 12 degrees through the same number of turns in opposite directions. Each 360 degrees rotation of the rack end produces 1.5 mm (0.059 in.) horizontal translation which results in a 12 degrees steering angle. Complete the procedure by retightening both lock nuts to 55 Nm (560 kgf-cm, 41 ft. lbs.) while maintaining the 1.5 mm (0.059 inch) distance tolerance between tie rod ends and rack end screws. Place boot clips back onto their respective locations.