OEM 2000 Toyota Sienna Alternator

2000 Toyota Sienna Parts Questions & Experts Answers

• Q: How to service the Alternator on 2000 Toyota Sienna?

  A: The first step in servicing the generator involves removing the drive belt through pivot bolt relaxation followed by lock bolt adjustment and adjusting bolt adjustment. The correct torque specifications are 56 Nm (570 kg.cm, 41 ft.lb) for the pivot bolt while the lock bolt requires 18 Nm (180 kg.cm, 13 ft.lb). First disconnect the generator connector and then take off the nut to detach the generator wire before removing the wire harness from its clip. After disconnecting all wiring components, the last step is to remove the pivot bolt with plate washer and adjusting lock bolt alongside the generator. When installing the components start with the opposite sequence used during disassembly.