×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2000 Toyota Celica A/C Accumulator
Accumulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Accumulator found
2000 Toyota Celica Dehydrator
Part Number: 88474-47010$72.83 MSRP: $102.24You Save: $29.41 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Dryer, Cooler; A/C Receiver Drier; Drier Desiccant Element; Dryer, Air Conditioning; A/C Accumulator; Accumulator; Drier
- Item Weight: 0.90 Pounds
- Item Dimensions: 12.9 x 4.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88474-47010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2000 Toyota Celica A/C Accumulator
Looking for affordable OEM 2000 Toyota Celica A/C Accumulator? Explore our comprehensive catalogue of genuine 2000 Toyota Celica A/C Accumulator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2000 Toyota Celica A/C Accumulator Parts Q&A
- Q: How to replace the A/C Accumulator on 2000 Toyota Celica?A: The first step to replace the dryer from the modulator starts by removing the modulator cap with a hexagon wrench (10 mm, 0.39 in.) followed by removing the filter. Through the use of pliers remove the dryer from the modulator and put in a new one following proper vinyl bag protocol while the 2 layered part remains at the top position. Install the filter into the modulator so that its protruding section should rest in the downward position. Follow these steps for cap installation of the modulator by applying ND-OIL 8 or equivalent oil first to the O-rings and screw section followed by hexagon wrench (10 mm, 0.39 in.) use to tighten caps with a required torque of 12.3 Nm (125 kg.cm, 9 ft.lb).