2006 Scion tC Airbag, Clock Spring, Air Bag Sensor

Air Bag Sensor, Airbag, Clock Spring Installation and Repair Tips for 2006 Scion tC

• Q: How to service the Clock Spring Assembly / Spiral Cable on 2006 Scion tC?

  A: In order to service the Clock Spring Assembly, disconnect the negative battery terminal and wait to avoid the activation of Air Bags. The steering pad and wheel assemblies, and lower steering column cover, are removed. Unassemble the clock spring sub-assembly. When installing, be careful to align it correctly and reconnect the parts, examine steering pad and SRS warning light afterwards.
• Q: What steps should be taken to inspect and replace the rear Air Bag sensor after a collision on 2006 Scion tC?

  A: Check the rear Air Bag sensor after collision. In the case of vehicles that are not in a traffic accident, carry out a diagnostic check up. Damage, particularly around the quarter panel, should be checked in case the Air Bag has not resulted. Change sensor in case of defects. Take the removal and installation procedures.
• Q: How to inspect and repair the front seat Airbag after a collision on 2006 Scion tC?

  A: After a collision, conduct repairs and inspections on the side Air Bag. For vehicles not involved in a collision, start with a diagnostic check and visually inspect the front seat Air Bag assembly. Replace it if there are defects. For vehicles involved in a collision, perform similar checks and replace if necessary.