2003 Toyota Tundra Airbag, Clock Spring, Air Bag Sensor

Air Bag Sensor, Airbag, Clock Spring Installation and Repair Tips for 2003 Toyota Tundra

• Q: How to remove and install the front Air Bag sensor on 2003 Toyota Tundra?

  A: A front Air Bag sensor can be removed by simply switching off the ignition switch. Always use new parts in case of a replacement, and should never reuse or fix collision sensors. Detach the parts that are required to reach and connect the sensor. Install new sensors with bolts making sure they are well torqued and facing the right direction.
• Q: What are the inspection and repair procedures for Airbag systems after a collision on 2003 Toyota Tundra?

  A: The Air Bag system has to be checked and possibly repaired after a crash. On vehicles, which have no collision, conduct a diagnostic test and physically examine the front passenger Air Bag assembly. In the case the Air Bag is deployed, do the diagnostic check again and look for damage and replace parts where needed. Always use proper removal and installation procedures.
• Q: How to service and repair the Clock Spring Assembly / Spiral Cable on 2003 Toyota Tundra?

  A: To service and repair the Clock Spring Assembly, the first step is to take out the steering wheel pad, steering wheel, upper and lower column covers. The clock spring is removed, and then installed again, then there comes the column covers, steering wheel, and steering wheel pad.