Toyota 45100-02E40-B0
Steering Wheel, Gray

The first step to remove a steering wheel begins with aligning front wheels parallel to the road and unplugging the negative terminal battery cable for at least 90 seconds to deactivate the SRS system. The service starts by removing the steering wheel covers numbered lower No. 3 and lower No. 2 and proceeds with the steering pad's removal. The set nut must be removed before disconnecting the spiral cable connectors to separate the steering wheel assembly from its main shaft position. Further steps include marking the alignment between the parts before the cable disconnect. Adopt the use of Special Service Tools 09950-50013, 09951-05010, 09952-05010, 09953-05020, and 09954-05021 during this procedure while applying minimal grease on the tip and threads of Special Service Tool (09953-05020) before usage begins. Procedures differ regarding the steering pad switch so customers must remove either their steering pad switch assembly or steering pad switch LH. The initial step includes taking out the steering wheel ornament No. 1 by disassembling its screw and releasing its 2 pins. The main switch of cruise control must be taken off from vehicles which have this system installed. You need to start by removing the screws from the lower steering wheel boss cover until all two claws disengage and then remove its attaching screws.

Install the cruise control main switch.