Toyota 75311-06100
Emblem

The procedure for installing the name plate starts with heating both the name plate and the vehicle body using a heat light while avoiding overheating. The process starts with preparing the No. 2 luggage compartment door name plate by cleaning both body surfaces and tape removal followed by adhesive cleanup with cleaner. The process for using existing name plates involves heating the components and stripping away the old tape before cleansing remnants and introducing new double-sided tape. After re-heating both components to install the name plate with a heat light the installer should remove adhesive release paper from the name plate and install it while preventing foreign materials from contact with exposed adhesive zones. The same steps should be performed again for the back door name plate as well as the side panel emblem after suitable surface preparation. Install the side panel emblem by adopting identical heating procedures as the first emblem while giving special attention to both the left and right sides.

You need to heat both the vehicle body and name plate with a heat light yet avoid overheating them. First secure protective tape around the No. 2 luggage compartment door name plate before you place piano wire between the vehicle body and name plate. The piano wire needs wooden blocks fastened at its ends prior to pulling it to dislodge double-sided tape from the name plate which must be extracted in a controlled manner to preserve both the name plate and body of the vehicle. The same treatment should be applied to the back door name plate and side panel emblem by using protective tape, a piano wire and proper removal techniques to prevent damage to both items and their supporting vehicle structure.