Toyota 88716-06110
Pipe, Cooler Refrigerant Liquid, A

When repairing or servicing the HVAC hose/line one must first eliminate the refrigerant gases from the refrigeration system. The faulty tube and hose should undergo replacement while immediately capping open fittings to stop moisture and dirt from entering through entrance points. Embed the bolt or nut joint to the torque specification while avoiding torque values beyond limits. The following service stages include evacuation of air from the refrigeration system followed by its charge with specified 800 plus or minus 50g (28.22 plus or minus 1.76 oz.) of refrigerant. A gas leak detector will then check for refrigerant leakage while the air conditioning system will operate as a final step.

The service and repair of HVAC hose/line requires removing all refrigerant from the refrigeration system before beginning. The next step involves the replacement of faulty tube or hose while simultaneously using quick caps to avert moisture and dirt entry into the system. Secure the bolt or nut joint with the proper torque setting without reaching beyond that value. You must conduct an evacuation of the refrigeration system air followed by a refrigerant charge of 800 plus or minus 50g (28.22 plus or minus 1.76 oz.) . The inspection procedure demands the usage of a detection instrument for checking refrigerant leakage and ending with evaluation of air conditioning system operation.